Content .. 45 46 47 48 ..

Nissan Cube. Manual - part 47

BCS

DIAGNOSIS SYSTEM (BCM)

BCS-37

< SYSTEM DESCRIPTION >

[WITH INTELLIGENT KEY SYSTEM]

THEFT ALM : CONSULT Function (BCM - THEFT)

INFOID:0000000010249050

DATA MONITOR

NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.

WORK SUPPORT

ACTIVE TEST

Monitored Item

Description

REQ SW -DR

Indicates [ON/OFF] condition of door request switch (driver side).

REQ SW -AS

Indicates [ON/OFF] condition of door request switch (passenger side).

REQ SW -RR

NOTE:
This is displayed even when it is not equipped.

REQ SW -RL

NOTE:
This is displayed even when it is not equipped.

REQ SW -BD/TR

Indicates [ON/OFF] condition of back door request switch.

PUSH SW

Indicates [ON/OFF] condition of push-button ignition switch

UNLK SEN -DR

Indicates [ON/OFF] condition of driver door UNLOCK status.

DOOR SW-DR

Indicates [ON/OFF] condition of front door switch (driver side).

DOOR SW-AS

Indicates [ON/OFF] condition of front door switch (passenger side).

DOOR SW-RR

Indicates [ON/OFF] condition of rear door switch RH.

DOOR SW-RL

Indicates [ON/OFF] condition of rear door switch LH.

DOOR SW-BK

Indicates [ON/OFF] condition of back door switch.

CDL LOCK SW

Indicates [ON/OFF] condition of lock signal from door lock/unlock switch LH and RH.

CDL UNLOCK SW

Indicates [ON/OFF] condition of unlock signal from door lock/unlock switch LH and RH.

KEY CYL LK-SW

Indicates [ON/OFF] condition of lock signal from door key cylinder.

KEY CYL UN-SW

Indicates [ON/OFF] condition of unlock signal from door key cylinder.

TR/BD OPEN SW

NOTE:
This is displayed even when it is not equipped.

TRNK/HAT MNTR

NOTE:
This is displayed even when it is not equipped.

RKE-LOCK

Indicates [ON/OFF] condition of LOCK signal from Intelligent Key.

RKE-UNLOCK

Indicates [ON/OFF] condition of UNLOCK signal from Intelligent Key.

RKE-TR/BD

NOTE:
This is displayed even when it is not equipped.

Service Item

Description

SECURITY ALARM SET

This mode is able to confirm and change security alarm ON-OFF setting.

THEFT ALM TRG

The switch which triggered vehicle security alarm is recorded.
This mode is able to confirm and erase the record of vehicle security alarm.
The trigger data can be erased by touching “CLEAR” on CONSULT screen.

Test Item

Description

THEFT IND

This test is able to check security indicator lamp operation. Security indicator lamp is turned on
when “ON” on CONSULT screen is touched.

VEHICLE SECURITY HORN

This test is able to check horn operation. Horn is activated for 0.5 seconds after “ON” on CONSULT
screen is touched.

BCS-38

< SYSTEM DESCRIPTION >

[WITH INTELLIGENT KEY SYSTEM]

DIAGNOSIS SYSTEM (BCM)

RETAIND PWR

RETAIND PWR : CONSULT Function (BCM - RETAINED PWR)

INFOID:0000000010249057

DATA MONITOR

NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.

SIGNAL BUFFER

SIGNAL BUFFER : CONSULT Function (BCM - SIGNAL BUFFER)

INFOID:0000000009949722

DATA MONITOR

NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable
to this vehicle, refer to CONSULT display items.

ACTIVE TEST

AIR PRESSURE MONITOR

AIR PRESSURE MONITOR : CONSULT Function

INFOID:0000000010249101

FUNCTION

The diagnosis functions (main functions) include the following: “WORK SUPPORT”, “SELF DIAGNOSTIC
RESULT”, “DATA MONITOR” and “ACTIVE TEST”.

HEADLAMP(HI)

This test is able to check headlamp operation. Headlamps are activated for 0.5 seconds after “ON”
on CONSULT screen is touched.

FLASHER

This test is able to check hazard warning lamp operation. Hazard warning lamps are activated after
“ON” on CONSULT screen is touched.

Test Item

Description

Monitor Item

Description

DOOR SW-DR

Indicates [ON/OFF] condition of driver side door switch.

DOOR SW-AS

Indicates [ON/OFF] condition of passenger side door switch.

Monitor item [UNIT]

Description

PUSH SW
[Off/On]

Displays the status of the push-button ignition switch (push switch) judged by BCM.

Test item

Opera-

tion

Description

OIL PRESSURE SW

Off

OFF

BCM transmits the oil pressure switch signal to the combination meter via CAN communica-
tion, which illuminates the oil pressure warning lamp in the combination meter.

Diagnostic test mode

Function

Work support

In this mode, it is possible to make quick and accurate adjustments by following the instruc-
tions on the CONSULT display.

Self diagnostic result

Receives self-diagnosis results from the BCM, and indicates DTCs and the number of mal-
functions.

Data monitor

Receives input/output signals from the BCM and indicates and stores them to facilitate locating
the causes of malfunctions.

Active test

Transmits command to the BCM to change output signals and check operation of output sys-
tem.

BCS

DIAGNOSIS SYSTEM (BCM)

BCS-39

< SYSTEM DESCRIPTION >

[WITH INTELLIGENT KEY SYSTEM]

WORK SUPPORT MODE

Refer to

WT-24, "Work Procedure"

SELF-DIAG RESULTS MODE

Refer to

BCS-82, "DTC Index"

DATA MONITOR MODE

Screen of data monitor mode is displayed.
NOTE:
• When malfunction is detected, CONSULT perform REAL-TIME DIAGNOSIS.

Also, any malfunction detected while in this mode will be displayed at real time.

• The following table includes information(items)inapplicable to this vehicle. For information(items)applicable

to this vehicle, refer to CONSULT display items.

NOTE:
Before performing the self-diagnosis, be sure to register the ID, or erase the actual malfunction location may
be different from that displayed on CONSULT.

ACTIVE TEST MODE

NOTE:
Before performing the self-diagnosis, be sure to register the ID, or erase the actual malfunction may be differ-
ent from that displayed on CONSULT.

TEST ITEM LIST

Monitor item (Unit)

Remark

AIR PRESS FL (kPa), (kg/cm

), (Psi)

Air pressure of tires

AIR PRESS FR (kPa), (kg/cm

), (Psi)

AIR PRESS RR (kPa), (kg/cm

), (Psi)

AIR PRESS RL (kPa), (kg/cm

), (Psi)

ID REGST FL1

ID is registered: Done
ID is not registered: Yet

ID REGST FR1

ID REGST RR1

ID REGST RL1

WARNING LAMP

Low tire pressure warning lamp ON: On
Low tire pressure warning lamp OFF: Off

BUZZER

Combination meter buzzer ON: On
Combination meter buzzer OFF: Off

Test item

Content

WARNING LAMP

This test is able to check to check that the low tire pressure warning lamp turns on.

ID REGIST WARNING

This test is able to check to check that the buzzer sounds or the low tire pressure warning lamp
turns on.

RUN FLAT TIRE W/L

NOTE:
This item is displayed, but cannot be use this item.

FLASHER

This test is able to check to check that each turn signal lamp turns on.

HORN

This test is able to check to check that the horn sounds.

BCS-40

< DTC/CIRCUIT DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

U1000 CAN COMM

DTC/CIRCUIT DIAGNOSIS

U1000 CAN COMM

Description

INFOID:0000000009949724

CAN (Controller Area Network) is a serial communication line for real time applications. It is an on-vehicle mul-
tiplex communication line with high data communication speed and excellent error detection ability. Modern
vehicle is equipped with many electronic control unit, and each control unit shares information and links with
other control units during operation (not independent). In CAN communication, control units are connected
with 2 communication lines (CAN H-line, CAN L-line) allowing a high rate of information transmission with less
wiring. Each control unit transmits/receives data but selectively reads required data only.
CAN Communication Signal Chart. Refer to

LAN-22, "CAN Communication Signal Chart"

DTC Logic

INFOID:0000000009949725

DTC DETECTION LOGIC

Diagnosis Procedure

INFOID:0000000009949726

PERFORM SELF DIAGNOSTIC

Turn ignition switch ON and wait for 2 seconds or more.

Check “Self Diagnostic Result” of BCM.

Is DTC “U1000” displayed?

YES

>> Refer to