|
|
BCS DIAGNOSIS SYSTEM (BCM) BCS-29 < SYSTEM DESCRIPTION > [WITH INTELLIGENT KEY SYSTEM] C D E F G H I J K L B A O P N FLASHER FLASHER : CONSULT Function (BCM - FLASHER) INFOID:0000000010249104 WORK SUPPORT *: Factory setting DATA MONITOR NOTE: ACTIVE TEST Test item Operation Description FR WIPER Hi Transmits the front wiper request signal (HI) to IPDM E/R with CAN communication to Lo Transmits the front wiper request signal (LO) to IPDM E/R with CAN communication to INT Transmits the front wiper request signal (INT) to IPDM E/R with CAN communication to Off Stops transmitting the front wiper request signal to stop the front wiper operation. RR WIPER On Outputs the voltage to operate the rear wiper motor. Off Stops the voltage to stop. Service item Setting item Setting HAZARD ANSWER Lock Only With locking only Sets the hazard warning lamp answer back function when Unlk Only With unlocking only Lock/Unlk* With locking/unlocking Off Without the function Monitor item [Unit] Description REQ SW -DR Indicated [On/Off] condition of door request switch (driver side) REQ SW -AS Indicated [On/Off] condition of door request switch (passenger side) PUSH SW Indicates [On/Off] condition of push-button ignition switch TURN SIGNAL R Each switch status that BCM detects from the combination switch reading function TURN SIGNAL L HAZARD SW The switch status input from the hazard switch RKE-LOCK Indicates [On/Off] condition of LOCK signal from Intelligent Key RKE-UNLOCK Indicates [On/Off] condition of UNLOCK signal from Intelligent Key RKE-PANIC Indicates [On/Off] condition of PANIC button of Intelligent Key |