|
|
PWC-54 < DTC/CIRCUIT DIAGNOSIS > DOOR SWITCH 3. Check continuity between door switch harness connector and ground. Is the inspection result normal? YES >> Replace BCM. Refer to BCS-135, "Removal and Installation" . NO >> Repair or replace harness. 3. CHECK DOOR SWITCH PWC-52, "WITH INTELLIGENT KEY : Component Inspection" . Is the inspection result normal? YES >> GO TO 4. NO >> Replace malfunctioning door switch. Refer to DLK-396, "Removal and Installation" 4. CHECK INTERMITTENT INCIDENT GI-44, "Intermittent Incident" >> Inspection End. WITHOUT INTELLIGENT KEY : Component Inspection INFOID:0000000011385892 1. CHECK DOOR SWITCH 1. Turn ignition switch OFF. 2. Disconnect door switch connector. 3. Check door switch. Is the inspection result normal? YES >> Inspection End. NO >> Replace malfunctioning door switch. Refer to DLK-396, "Removal and Installation" Door switch BCM Continuity Connector Terminal Connector Terminal Front LH B71 3 B16 57 Yes Front RH B141 53 Rear LH B70 52 Rear RH B142 50 Door switch Ground Continuity Connector Terminal Front LH B71 3 No Front RH B141 Rear LH B70 Rear RH B142 Terminal Door switch condition Continuity Door switch 3 Ground part of door switch Pressed No Released Yes |