|
|
PWC-42 < DTC/CIRCUIT DIAGNOSIS > POWER WINDOW MOTOR Is the inspection result normal? YES >> Inspection End. NO >> Replace front power window motor RH. Refer to GW-16, "Removal and Installation" REAR LH INFOID:0000000011278709 Door glass moves UP/DOWN by receiving the signal from main power window and door lock/unlock switch or rear power window switch LH. REAR LH : Component Function Check INFOID:0000000011278710 1. CHECK REAR POWER WINDOW MOTOR LH OPERATION Check rear power window motor LH operation with main power window and door lock/unlock switch or rear power window switch LH. YES >> Rear power window motor LH is OK. NO >> Refer to PWC-42, "REAR LH : Diagnosis Procedure" REAR LH : Diagnosis Procedure INFOID:0000000011278711 1. CHECK REAR POWER WINDOW MOTOR LH INPUT SIGNAL 1. Turn ignition switch OFF. 2. Disconnect rear power window motor LH connector. 3. Turn ignition switch ON. 4. Check voltage between rear power window motor LH harness connector and ground. Is the inspection result normal? YES >> GO TO 3. NO >> GO TO 2. 2. CHECK REAR POWER WINDOW MOTOR LH CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect rear power window switch LH connector. 3. Check continuity between rear power window switch LH harness connector and rear power window motor LH harness connector. 4. Check continuity between rear power window switch LH connector and ground. Front power window motor RH connector Terminal Motor condition (+) (–) D105 1 3 DOWN 3 1 UP (+) (–) Condition Voltage (Approx.) Rear power window motor LH Connector Terminal D205 1 Ground Rear power win- UP Battery voltage DOWN 0 3 UP 0 DOWN Battery voltage Rear power window switch LH Rear power window motor LH Continuity Connector Terminal Connector Terminal D204 4 D205 3 Yes 5 1 |