|
|
PWC-38 < DTC/CIRCUIT DIAGNOSIS > REAR POWER WINDOW SWITCH 4. Check continuity between main power and door lock/unlock switch harness connector and ground. Is the inspection result normal? YES >> Replace main power window and door lock/unlock switch.Refer to . NO >> Repair or replace harness. 4. CHECK INTERMITTENT INCIDENT GI-44, "Intermittent Incident" >> Inspection End. Component Inspection INFOID:0000000011278700 1. CHECK REAR POWER WINDOW SWITCH 1. Turn ignition switch OFF. 2. Disconnect rear power window switch connector. 3. Check rear power window switch terminals under the following conditions: Is the inspection result normal? YES >> Inspection End. NO >> Replace rear power window switch. Refer to PWC-67, "Removal and Installation" Main power window and door lock/unlock switch Rear power window switch Continuity Connector Terminal Connector Terminal D6 9 LH D204 2 Yes 8 3 6 RH D304 3 7 2 Main power window and door lock/unlock switch Ground Continuity Connector Terminal D6 9 No 8 6 7 Terminal Rear power window switch condition Continuity 1 5 DOWN Yes 3 4 3 4 NEUTRAL 2 5 1 4 UP 2 5 |