|
|
DIAGNOSIS SYSTEM (BCM) EXL-21 < SYSTEM DESCRIPTION > [HALOGEN HEADLAMP] C D E F G H I J K M A B EXL N O P *: Initial setting WITH INTELLIGENT KEY : CONSULT Function (BCM - FLASHER) INFOID:0000000011392714 DATA MONITOR WORK SUPPORT *: Initial setting WITHOUT INTELLIGENT KEY INFOID:0000000011392715 APPLICATION ITEM CONSULT performs the following functions via CAN communication with BCM. ILL DELAY SET MODE 8 Autolamp delay timer. MODE 7 MODE 6 MODE 4 MODE 5 MODE 3 MODE 2 MODE 1* Support Item Setting Description Monitor Item [Unit] Description REQ SW -DR [On/Off] Indicates condition of door request switch LH. REQ SW -AS [On/Off] Indicates condition of door request switch RH. PUSH SW [On/Off] Indicates condition of push-button ignition switch. TURN SIGNAL R [On/Off] Indicates condition of turn signal function of combination switch. TURN SIGNAL L [On/Off] HAZARD SW [On/Off] Indicates condition of hazard switch. RKE-LOCK [On/Off] Indicates condition of lock signal from Intelligent Key. RKE-UNLOCK [On/Off] Indicates condition of unlock signal from Intelligent Key. RKE-PANIC [On/Off] Indicates condition of panic alarm signal from Intelligent Key. Support Item Setting Description 3-TIME FLASHER SETTING On* 3-time flasher setting ON. Off 3-time flasher setting OFF. Direct Diagnostic Mode Description Ecu Identification The BCM part number is displayed. Self Diagnostic Result The BCM self diagnostic results are displayed. Data Monitor The BCM input/output data is displayed in real time. Active Test The BCM activates outputs to test components. Work support The settings for BCM functions can be changed. Configuration • The vehicle specification can be read and saved. CAN Diag Support Mntr The result of transmit/receive diagnosis of CAN communication is displayed. |