Nissan Rogue. Manual - part 265

 

  Index      Nissan     Nissan Rogue (2015 year) - Service and Repair Manual

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  263  264  265  266   ..

 

 

Nissan Rogue. Manual - part 265

 

 

DAS

C1BAB-00 STOP LAMP SWITCH

DAS-231

< DTC/CIRCUIT DIAGNOSIS >

[CHASSIS CONTROL]

C

D

E

F

G

H

I

J

K

L

M

B

N

P

A

YES (“U1000-00”)>>Refer to 

DAS-260, "Diagnosis Procedure"

.

YES (other DTC)>>Check the DTC.

NO

>> Inspection End.

DAS-232

< DTC/CIRCUIT DIAGNOSIS >

[CHASSIS CONTROL]

C1BB2-00 CONTROL MODULE

C1BB2-00 CONTROL MODULE

DTC Description

INFOID:0000000011277392

DTC DETECTION LOGIC

POSSIBLE CAUSE

• Chassis control module

FAIL-SAFE

The following functions are suspended:

• Active Trace Control function

• Active Ride Control function

• Active Engine Brake function

DTC CONFIRMATION PROCEDURE

1.

PRECONDITIONING

If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn the ignition switch OFF

and wait at least 10 seconds before conducting the next test.

>> GO TO 2.

2.

CHECK DTC DETECTION

With CONSULT

1. Turn the ignition switch OFF to ON.

CAUTION:

Be sure to wait of 10 seconds after turning ignition switch OFF or ON.

2. Perform “Self Diagnostic Result” of “CHASSIS CONTROL”.
Is DTC “C1BB2-00” detected?

YES

>> Proceed to 

DAS-232, "Diagnosis Procedure"

.

NO-1 >> To check malfunction symptom before repair: Refer to 

GI-44, "Intermittent Incident"

.

NO-2 >> Confirmation after repair: Inspection End.

Diagnosis Procedure

INFOID:0000000011277393

1.

PERFORM SELF-DIAGNOSIS

With CONSULT

1. Erase “Self Diagnostic Result” of “CHASSIS CONTROL”.

2. Turn the ignition switch OFF and wait for 10 seconds or more.

3. Turn the ignition switch ON.

4. Perform “Self Diagnostic Result” of “CHASSIS CONTROL”.
Is DTC “C1BB2-00” detected?

YES

>> Replace the chassis control module. Refer to 

DAS-286, "Removal and Installation"

.

NO

>> Inspection End.

DTC

Display Item

(Trouble diagnosis content)

Malfunction detected condition

C1BB2-00

CONTROL MODULE
(Control module)

When a malfunction is detected in chassis control module.

DAS

C1BB3-00 CONTROL MODULE

DAS-233

< DTC/CIRCUIT DIAGNOSIS >

[CHASSIS CONTROL]

C

D

E

F

G

H

I

J

K

L

M

B

N

P

A

C1BB3-00 CONTROL MODULE

DTC Description

INFOID:0000000011277394

DTC DETECTION LOGIC

POSSIBLE CAUSE

• Chassis control module

FAIL-SAFE

The following functions are suspended:

• Active Trace Control function

• Active Ride Control function

• Active Engine Brake function

DTC CONFIRMATION PROCEDURE

1.

PRECONDITIONING

If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn the ignition switch OFF

and wait at least 10 seconds before conducting the next test.

>> GO TO 2.

2.

CHECK DTC DETECTION

With CONSULT

1. Turn the ignition switch OFF to ON.

CAUTION:

Be sure to wait of 10 seconds after turning ignition switch OFF or ON.

2. Perform “Self Diagnostic Result” of “CHASSIS CONTROL”.
Is DTC “C1BB3-00” detected?

YES

>> Proceed to 

DAS-233, "Diagnosis Procedure"

.

NO-1 >> To check malfunction symptom before repair: Refer to 

GI-44, "Intermittent Incident"

.

NO-2 >> Confirmation after repair: Inspection End.

Diagnosis Procedure

INFOID:0000000011277395

1.

PERFORM SELF-DIAGNOSIS

With CONSULT

1. Erase “Self Diagnostic Result” of “CHASSIS CONTROL”.

2. Turn the ignition switch OFF and wait for 10 seconds or more.

3. Turn the ignition switch ON.

4. Perform “Self Diagnostic Result” of “CHASSIS CONTROL”.
Is DTC “C1BB3-00” detected?

YES

>> Replace the chassis control module. Refer to 

DAS-286, "Removal and Installation"

.

NO

>> Inspection End.

DTC

Display Item

(Trouble diagnosis content)

Malfunction detected condition

C1BB3-00

CONTROL MODULE
(Control module)

When a malfunction is detected in chassis control module.

DAS-234

< DTC/CIRCUIT DIAGNOSIS >

[CHASSIS CONTROL]

C1BB4-00 CONTROL MODULE

C1BB4-00 CONTROL MODULE

DTC Description

INFOID:0000000011277396

DTC DETECTION LOGIC

POSSIBLE CAUSE

• Chassis control module

FAIL-SAFE

The following functions are suspended:

• Active Trace Control function

• Active Ride Control function

• Active Engine Brake function

DTC CONFIRMATION PROCEDURE

1.

PRECONDITIONING

If “DTC CONFIRMATION PROCEDURE” has been previously conducted, always turn the ignition switch OFF

and wait at least 10 seconds before conducting the next test.

>> GO TO 2.

2.

CHECK DTC DETECTION

With CONSULT

1. Turn the ignition switch OFF to ON.

CAUTION:

Be sure to wait of 10 seconds after turning ignition switch OFF or ON.

2. Perform “Self Diagnostic Result” of “CHASSIS CONTROL”.
Is DTC “C1BB4-00” detected?

YES

>> Proceed to 

DAS-234, "Diagnosis Procedure"

.

NO-1 >> To check malfunction symptom before repair: Refer to 

GI-44, "Intermittent Incident"

.

NO-2 >> Confirmation after repair: Inspection End.

Diagnosis Procedure

INFOID:0000000011277397

1.

PERFORM SELF-DIAGNOSIS

With CONSULT

1. Erase “Self Diagnostic Result” of “CHASSIS CONTROL”.

2. Turn the ignition switch OFF and wait for 10 seconds or more.

3. Turn the ignition switch ON.

4. Perform “Self Diagnostic Result” of “CHASSIS CONTROL”.
Is DTC “C1BB4-00” detected?

YES

>> Replace the chassis control module. Refer to 

DAS-286, "Removal and Installation"

.

NO

>> Inspection End.

DTC

Display Item

(Trouble diagnosis content)

Malfunction detected condition

C1BB4-00

CONTROL MODULE
(Control module)

When a malfunction is detected in chassis control module.

 

 

 

 

 

 

 

Content   ..  263  264  265  266   ..