Nissan Rogue. Manual - part 114
BCS-62
< BASIC INSPECTION >
[WITH INTELLIGENT KEY SYSTEM]
INSPECTION AND ADJUSTMENT
2.
PERFORM “SAVED DATA LIST”
CONSULT
Automatically “Operation Log Selection” window will display if “Before Replace ECU” was performed. Select
applicable file from the “Save Data List” and press “Confirm”.
>> Work End.
3.
PERFORM “AFTER REPLACE ECU” OR “MANUAL CONFIGURATION”
CONSULT
1. Select “After Replace ECU” or “Manual Configuration”.
2. Identify the correct model and configuration list. Refer to
BCS-62, "CONFIGURATION (BCM) : Configura-
3. Confirm and/or change setting value for each item.
CAUTION:
Thoroughly read and understand the vehicle specification. ECU control may not operate normally
if the setting is not correct.
4. Select “Next”.
CAUTION:
Make sure to select “Next”, confirm each setting value and press “OK” even if the indicated con-
figuration of brand new BCM is same as the desirable configuration. If not, configuration which is
set automatically by selecting vehicle model cannot be memorized.
5. When "Completed", select "End".
>> GO TO 4.
4.
OPERATION CHECK
Confirm that each function controlled by BCM operates normally.
>> Work End.
CONFIGURATION (BCM) : Configuration List
INFOID:0000000011280211
CAUTION:
Thoroughly read and understand the vehicle specification. Incorrect settings may result in abnormal
control of ECU.
⇔: Items which confirm vehicle specifications
MANUAL SETTING ITEM
Items
Setting value
I-KEY
WITH
⇔ WITHOUT
DTRL
WITH
⇔ WITHOUT
AUTO DOOR UNLOCK TIMING
WITH I-KEY
⇔ W/O I-KEY