|
|
Content .. 1096 1097 1098 1099 ..
B2192 ID DISCORD, IMMU-ECM SEC-171 < DTC/CIRCUIT DIAGNOSIS > [WITHOUT INTELLIGENT KEY SYSTEM] C D E F G H I J L M A B SEC N O P B2192 ID DISCORD, IMMU-ECM DTC Logic INFOID:0000000011278581 DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1. PERFORM DTC CONFIRMATION PROCEDURE 1. Turn ignition switch ON. 2. Check DTC in “Self Diagnostic Result” of “BCM” using CONSULT. YES >> GO TO SEC-171, "Diagnosis Procedure" NO >> Inspection End. Diagnosis Procedure INFOID:0000000011278582 1. PERFORM INITIALIZATION Perform initialization of BCM and reregistration of all keys using CONSULT. Refer to the CONSULT Immobi- lizer mode and follow the on-screen instructions. YES >> Inspection End. NO >> GO TO 2. 2. CHECK SELF-DIAGNOSTIC RESULT 1. Select “Self Diagnostic Result” of “BCM” using CONSULT. 2. Erase DTC. 3. Perform DTC CONFIRMATION PROCEDURE for DTC B2192. Refer to . Is DTC detected? YES >> GO TO 3. NO >> Inspection End. 3. REPLACE BCM 1. Replace BCM. Refer to BCS-135, "Removal and Installation" . 2. Perform initialization of BCM and reregistration of all keys using CONSULT. Refer to the CONSULT Immo- bilizer mode and follow the on-screen instructions. Can the system be initialized and can the engine be started with registered key? YES >> Inspection End. NO >> GO TO 4. 4. REPLACE ECM 1. Replace ECM. Refer to EC-502, "Removal and Installation" 2. Perform “ADDITIONAL SERVICE WHEN REPLACING ECM”. Refer to >> Inspection End. DTC No. Trouble diagnosis name DTC detecting condition Possible cause B2192 ID DISCORD BCM-ECM The ID verification results between • Harness or connectors (The CAN communication line is open • BCM 2015 Rogue NAM |