|
|
BCS DIAGNOSIS SYSTEM (BCM) BCS-23 < SYSTEM DESCRIPTION > [BCM] C D E F G H I J K L B A O P N WIPER : CONSULT Function (BCM - WIPER) INFOID:0000000009467045 DATA MONITOR ACTIVE TEST WORK SUPPORT * : Initial setting FLASHER INFOID:0000000009467046 DATA MONITOR ACTIVE TEST WORK SUPPORT Monitor Item [Unit] Description PUSH SW [On/Off] Indicates condition of push button ignition switch VEH SPEED 1 [km/h] Indicates vehicle speed signal received from ABS on CAN communication line FR WIPER HI [On/Off] Indicates condition of wiper operation of combination switch FR WIPER LOW [On/Off] FR WASHER SW [On/Off] FR WIPER INT [On/Off] FR WIPER STOP [On/Off] Indicates front wiper auto stop signal received from IPDM E/R on CAN communication line INT VOLUME [1 − 7] Indicates condition of intermittent wiper operation of combination switch Test Item Description FR WIPER This test is able to check front wiper operation [INT/Lo/Hi/Off]. Support Item Setting Description WIPER SPEED SETTING On Front wiper intermittent time linked with vehicle speed and wiper dial position Off* Front wiper intermittent time linked with wiper dial position Monitor Item [Unit] Description REQ SW -DR [On/Off] Indicates condition of door request switch LH REQ SW -AS [On/Off] Indicates condition of door request switch RH PUSH SW [On/Off] Indicates condition of push button ignition switch TURN SIGNAL R [On/Off] Indicates condition of turn signal function of combination switch TURN SIGNAL L [On/Off] HAZARD SW [On/Off] Indicates condition of hazard switch RKE-LOCK [On/Off] Indicates condition of lock signal from Intelligent Key RKE-UNLOCK [On/Off] Indicates condition of unock signal from Intelligent Key RKE-PANIC [On/Off] Indicates condition of panic alarm signal from Intelligent Key Test Item Description FLASHER This test is able to check turn signal lamp operation [Off/LH/RH]. |