Nissan Maxima. Manual - part 218

BCS

DIAGNOSIS SYSTEM (BCM)

BCS-19

< SYSTEM DESCRIPTION >

[BCM]

C

D

E

F

G

H

I

J

K

L

B

A

O

P

N

DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)

INFOID:0000000009467040

SELF DIAGNOSTIC RESULT

Refer to 

BCS-64, "DTC Index"

.

DATA MONITOR

ACTIVE TEST

WORK SUPPORT

* : Initial setting

REAR DEFOGGER
REAR DEFOGGER : CONSULT Function (BCM - REAR DEFOGGER)

INFOID:0000000009467041

DATA MONITOR

Monitor Item [Unit]

Description

REQ SW-DR [On/Off]

Indicates condition of door request switch LH

REQ SW-AS [On/Off]

Indicates condition of door request switch RH

REQ SW-BD/TR [On/Off]

Indicates condition of trunk opener request switch

DOOR SW-DR [On/Off]

Indicates condition of front door switch LH

DOOR SW-AS [On/Off]

Indicates condition of front door switch RH

DOOR SW-RR [On/Off]

Indicates condition of rear door switch RH

DOOR SW-RL [On/Off]

Indicates condition of rear door switch LH

DOOR SW-BK [On/Off]

Indicates condition of trunk switch

CDL LOCK SW [On/Off]

Indicates condition of lock signal from door lock and unlock switch

CDL UNLOCK SW [On/Off]

Indicates condition of unlock signal from door lock and unlock switch

KEY CYL LK-SW [On/Off]

Indicates condition of lock signal from door key cylinder switch

KEY CYL UN-SW [On/Off]

Indicates condition of unlock signal from door key cylinder switch

Test Item

Description

DOOR LOCK

This test is able to check door lock operation [OTR ULK/AS UNLK/DR UNLK/ALL UNLK/ALL 
LCK].

Support Item

Setting

Description

DOOR LOCK-UNLOCK SET

On*

Automatic door locks function ON

Off

Automatic door locks function OFF

AUTOMATIC DOOR LOCK SELECT

P RANGE

Doors lock automatically when shifted out of park (P)

VH SPD*

Doors lock automatically when vehicle speed reaches 24 km/h (15 mph)

AUTOMATIC DOOR UNLOCK
SELECT

MODE4

Drivers door unlocks automatically when shifted into park (P)

MODE3

Drivers door unlocks automatically when ignition is switched from ON to OFF

MODE2

Doors unlock automatically when shifted into park (P)

MODE1*

Doors unlock automatically when ignition is switched from ON to OFF

AUTOMATIC LOCK/UNLOCK
SELECT

Lock/Unlock*

Automatic door locks function operates in lock and unlock

Lock Only

Automatic door locks function operates in lock only

Unlock Only

Automatic door locks function operates in unlock only

Off

Automatic door locks function OFF

BCS-20

< SYSTEM DESCRIPTION >

[BCM]

DIAGNOSIS SYSTEM (BCM)

ACTIVE TEST

BUZZER
BUZZER : CONSULT Function (BCM - BUZZER)

INFOID:0000000009467042

DATA MONITOR

ACTIVE TEST

INT LAMP
INT LAMP : CONSULT Function (BCM - INT LAMP)

INFOID:0000000009467043

DATA MONITOR

Monitor Item [Unit]

Description

PUSH SW [On/Off]

Indicates condition of push button ignition switch

REAR DEF SW [On/Off]

Indicates condition of rear window defogger switch

Test Item

Description

REAR DEFOGGER

This test is able to check rear window defogger operation [Off/On].

Monitor Item [Unit]

Description

PUSH -SW [On/Off]

Indicates condition of push button ignition switch

UNLK SEN -DR [On/Off]

Indicates condition of door unlock sensor

VEH SPEED 1 [km/h]

Indicates vehicle speed signal received from ABS on CAN communication line

KEY SW -SLOT [On/Off]

Indicates condition of key slot

TAIL LAMP SW [On/Off]

Indicates condition of combination switch

FR FOG SW [On/Off]

Indicates condition of front fog lamp switch

DOOR SW-DR [On/Off]

Indicates condition of front door switch LH

Test Item

Description

IGN KEY WARN ALM

This test is able to check key warning chime operation [On/Off].

SEAT BELT WARN TEST

This test is able to check seat belt warning chime operation [On/Off].

ID REGIST WARNING

This test is able to check ID regist warning chime operation [On/Off].

LIGHT WARN ALM

This test is able to check light warning chime operation [On/Off].

Monitor Item [Unit]

Description

REQ SW -DR [On/Off]

Indicates condition of door request switch LH

REQ SW -AS [On/Off]

Indicates condition of door request switch RH

PUSH -SW [On/Off]

Indicates condition of push button ignition switch

ACC RLY -F/B [ON/OFF]

Indicates condition of accessory relay

UNLK SEN -DR [On/Off]

Indicates condition of door unlock sensor

KEY SW -SLOT [On/Off]

Indicates condition of key slot

DOOR SW-DR [On/Off]

Indicates condition of front door switch LH

DOOR SW-AS [On/Off]

Indicates condition of front door switch RH

DOOR SW-RR [On/Off]

Indicates condition of rear door switch RH

DOOR SW-RL [On/Off]

Indicates condition of rear door switch LH

DOOR SW-BK [On/Off]

Indicates condition of trunk switch

CDL LOCK SW [On/Off]

Indicates condition of lock signal from door lock and unlock switch

BCS

DIAGNOSIS SYSTEM (BCM)

BCS-21

< SYSTEM DESCRIPTION >

[BCM]

C

D

E

F

G

H

I

J

K

L

B

A

O

P

N

ACTIVE TEST

WORK SUPPORT

* : Initial setting

HEADLAMP
HEADLAMP : CONSULT Function (BCM - HEAD LAMP)

INFOID:0000000009467044

DATA MONITOR

CDL UNLOCK SW [On/Off]

Indicates condition of unlock signal from door lock and unlock switch

KEY CYL LK-SW [On/Off]

Indicates condition of lock signal from door key cylinder switch

KEY CYL UN-SW [On/Off]

Indicates condition of unlock signal from door key cylinder switch

TRNK/HAT MNTR [ON/OFF]

Indicates condition of trunk room lamp switch

RKE-LOCK [On/Off]

Indicates condition of lock signal from Intelligent Key

RKE-UNLOCK [On/Off]

Indicates condition of unlock signal from Intelligent Key

Monitor Item [Unit]

Description

Test Item

Description

INT LAMP

This test is able to check interior room lamp operation [On/Off].

STEP LAMP TEST

This test is able to check step lamp operation [On/Off].

LUGGAGE LAMP TEST

This test is able to check trunk room lamp operation [On/Off].

Support Item

Setting

Description

SET I/L D-UNLCK INTCON

On*

Interior room lamp timer function ON

Off

Interior room lamp timer function OFF

ROOM LAMP TIMER SET

MODE 4

30 sec.

Sets the interior room lamp ON time. (Timer operating time)

MODE 3* 15 sec.

MODE 2

7.5 sec.

ROOM LAMP ON TIME SET

MODE 5

0 sec.

Sets the interior room lamp gradual brightening time.

MODE 4

3 sec.

MODE 3

2 sec.

MODE 2* 1 sec.

MODE 1

0.5 sec.

ROOM LAMP OFF TIME SET

MODE 5

0 sec.

Sets the interior room lamp gradual dimming time.

MODE 4* 3 sec.

MODE 3

2 sec.

MODE 2

1 sec.

MODE 1

0.5 sec.

R LAMP TIMER LOGIC SET

MODE 2

Interior room lamp timer activates with all doors.

MODE 1*

Interior room lamp timer activates with the driver door only.

Monitor Item [Unit]

Description

PUSH SW [On/Off]

Indicates condition of push button ignition switch

ENGINE STATE [Stop/Stall/Crank/Run]

Indicates engine status received from ECM on CAN communication line

VEH SPEED 1 [km/h]

Indicates vehicle speed signal received from ABS on CAN communication line

KEY SW -SLOT [On/Off]

Indicates condition of key slot

BCS-22

< SYSTEM DESCRIPTION >

[BCM]

DIAGNOSIS SYSTEM (BCM)

ACTIVE TEST

WORK SUPPORT

* : Initial setting

WIPER

TURN SIGNAL R [On/Off]

Indicates condition of combination switch

TURN SIGNAL L [On/Off]

TAIL LAMP SW [On/Off]

HI BEAM SW [On/Off]

HEAD LAMP SW 1 [On/Off]

HEAD LAMP SW 2 [On/Off]

PASSING SW [On/Off]

AUTO LIGHT SW [On/Off]

FR FOG SW [On/Off]

DOOR SW-DR [On/Off]

Indicates condition of front door switch LH

DOOR SW-AS [On/Off]

Indicates condition of front door switch RH

DOOR SW-RR [On/Off]

Indicates condition of rear door switch RH

DOOR SW-RL [On/Off]

Indicates condition of rear door switch LH

DOOR SW-BK [On/Off]

Indicates condition of trunk switch

OPTICAL SENSOR [V]

Indicates voltage signal from optical sensor

Monitor Item [Unit]

Description

Test Item

Description

TAIL LAMP

This test is able to check tail lamp operation [On/Off].

HEAD LAMP

This test is able to check head lamp operation [Hi/Low/Off].

FR FOG LAMP

This test is able to check front fog lamp operation [On/Off].

DAYTIME RUNNING LIGHT

This test is able to check daytime running light operation [LH/RH/Off].

ILL DIM SIGNAL

This test is able to check head lamp illumination dimming operation [On/Off].

Support Item

Setting

Description

CUSTOM A/LIGHT SETTING

MODE 4

Less sensitive setting than normal setting (Turns ON later than 
normal operation.)

MODE 3

More sensitive setting than MODE 2 (Turns ON earlier than MODE 
2.)

MODE 2

More sensitive setting than normal setting (Turns ON earlier than 
normal operation.)

MODE 1*

Normal

BATTERY SAVER SET

On*

Exterior lamp battery saver function ON

Off

Exterior lamp battery saver function OFF

ILL DELAY SET

MODE 8

180 sec.

Sets delay timer function operation time
(All doors closed)

MODE 7

150 sec.

MODE 6

120 sec.

MODE 4

60 sec.

MODE 5

90 sec.

MODE 3

30 sec.

MODE 2

OFF

MODE 1* 45 sec.