|
|
Content .. 1224 1225 1226 1227 ..
WW-28 < ECU DIAGNOSIS INFORMATION > BCM (BODY CONTROL MODULE) ECU DIAGNOSIS INFORMATION BCM (BODY CONTROL MODULE) Reference Value INFOID:0000000010054170 NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information. • Activate and display TPMS transmitter IDs • Display tire pressure reported by the TPMS transmitter • Read TPMS DTCs • Register TPMS transmitter IDs • Check Intelligent Key relative signal strength • Confirm vehicle Intelligent Key antenna signal strength VALUES ON THE DIAGNOSIS TOOL Monitor Item Condition Value/Status FR WIPER HI Other than front wiper switch HI OFF Front wiper switch HI ON FR WIPER LOW Other than front wiper switch LO OFF Front wiper switch LO ON FR WASHER SW Front washer switch OFF OFF Front washer switch ON ON FR WIPER INT Other than front wiper switch INT OFF Front wiper switch INT ON FR WIPER STOP Front wiper is not in STOP position OFF Front wiper is in STOP position ON INT VOLUME Wiper intermittent dial is in a dial position 1 - 7 Wiper intermittent dial position TURN SIGNAL R Other than turn signal switch RH OFF Turn signal switch RH ON TURN SIGNAL L Other than turn signal switch LH OFF Turn signal switch LH ON TAIL LAMP SW Other than lighting switch 1ST and 2ND OFF Lighting switch 1ST or 2ND ON HI BEAM SW Other than lighting switch HI OFF Lighting switch HI ON HEAD LAMP SW 1 Other than lighting switch 2ND OFF Lighting switch 2ND ON HEAD LAMP SW 2 Other than lighting switch 2ND OFF Lighting switch 2ND ON PASSING SW Other than lighting switch PASS OFF Lighting switch PASS ON AUTO LIGHT SW Other than lighting switch AUTO OFF Lighting switch AUTO ON FR FOG SW Front fog lamp switch OFF OFF Front fog lamp switch ON ON DOOR SW-DR Driver door closed OFF Driver door opened ON |