Nissan Maxima. Manual - part 1207

C1716 - C1719 TRANSMITTER PRESSURE MALFUNCTION

WT-17

< DTC/CIRCUIT DIAGNOSIS >

C

D

F

G

H

I

J

K

L

M

A

B

WT

N

O

P

C1716 - C1719 TRANSMITTER PRESSURE MALFUNCTION

Description

INFOID:0000000010046344

Air pressure data from one or more transmitters is out of range.

DTC Logic

INFOID:0000000010046345

NOTE:

The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II

User Guide for additional information.

• Activate and display TPMS transmitter IDs

• Display tire pressure reported by the TPMS transmitter

• Read TPMS DTCs

• Register TPMS transmitter IDs

DTC DETECTION LOGIC

DTC CONFIRMATION PROCEDURE

1.

ID REGISTRATION AND VEHICLE DRIVING

1. Carry out ID registration of all transmitters. Refer to 

WT-6, "ID Registration Procedure"

.

2. Drive at a speed of 40 km/h (25 MPH) or more for 3 minutes, and then drive the vehicle at any speed for

10 minutes.

3. Check all tire pressures with CONSULT within 5 minutes.
Does “DATA MONITOR ITEM” display tire pressure as normal without any warning lamp?

YES

>> Inspection End.

NO

>> Refer to 

WT-17, "Diagnosis Procedure"

.

Diagnosis Procedure

INFOID:0000000010046346

NOTE:

The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II

User Guide for additional information.

• Activate and display TPMS transmitter IDs

• Display tire pressure reported by the TPMS transmitter

• Read TPMS DTCs

• Register TPMS transmitter IDs

MALFUNCTION CODE NO. 35, 36, 37 OR 38 (DTC C1716, C1717, C1718 OR C1719)

1.

CHECK ALL TIRE PRESSURES

Check all tire pressures. Refer to 

WT-65, "Tire"

.

Are there any tires with pressure of 64 psi or more?

YES

>> Adjust tire pressure to specified value.

NO

>> GO TO 2

2.

ID REGISTRATION AND VEHICLE DRIVING

1. Carry out ID registration of all transmitters. Refer to 

WT-6, "ID Registration Procedure"

.

2. Drive at a speed of 40 km/h (25 MPH) or more for several minutes without stopping.

3. Check all tire pressures with CONSULT within 15 minutes after vehicle speed becomes 17 km/h (11

MPH).

DTC

CONSULT

DTC detecting condition

C1716

[PRESSDATA - ERR] FL

Air pressure data from FL transmitter is malfunctioning.

C1717

[PRESSDATA - ERR] FR

Air pressure data from FR transmitter is malfunctioning.

C1718

[PRESSDATA - ERR] RR

Air pressure data from RR transmitter is malfunctioning.

C1719

[PRESSDATA - ERR] RL

Air pressure data from RL transmitter is malfunctioning.

WT-18

< DTC/CIRCUIT DIAGNOSIS >

C1716 - C1719 TRANSMITTER PRESSURE MALFUNCTION

Does “DATA MONITOR ITEM” display 64 psi or more?

YES

>> Replace malfunctioning transmitter, then GO TO 3. Refer to 

WT-62, "Removal and Installation"

.

NO

>> GO TO 3

3.

ID REGISTRATION AND VEHICLE DRIVING

1. Carry out ID registration of all transmitters. Refer to 

WT-6, "ID Registration Procedure"

.

2. Drive at a speed of 40 km/h (25 MPH) or more for 3 minutes, and then drive the vehicle at any speed for

10 minutes.

3. Check all tire pressures with CONSULT within 5 minutes.
Does “DATA MONITOR ITEM” display tire pressure as normal without any warning lamp?

YES

>> Inspection End.

NO

>> Proceed to the inspection applicable to DTC.

Special Repair Requirement

INFOID:0000000010046347

Perform preliminary check. Refer to 

WT-5, "Preliminary Check"

.

C1729 VEHICLE SPEED SIGNAL

WT-19

< DTC/CIRCUIT DIAGNOSIS >

C

D

F

G

H

I

J

K

L

M

A

B

WT

N

O

P

C1729 VEHICLE SPEED SIGNAL

Description

INFOID:0000000010046348

The vehicle speed signal is not being detected by the BCM.

DTC Logic

INFOID:0000000010046349

NOTE:

The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II

User Guide for additional information.

• Activate and display TPMS transmitter IDs

• Display tire pressure reported by the TPMS transmitter

• Read TPMS DTCs

• Register TPMS transmitter IDs

DTC DETECTION LOGIC

DTC CONFIRMATION PROCEDURE

1.

CHECK SELF-DIAGNOSTIC RESULTS

1. On “SELECT DIAG MODE”, select the “SELF-DIAG RESULT” screen.

2. Check display contents on “SELF DIAG RESULT” screen.
Is the “CAN COMM CIRCUIT” displayed in the self-diagnosis display?

YES

>> Refer to 

WT-19, "Diagnosis Procedure"

.

NO

>> Inspection End.

Diagnosis Procedure

INFOID:0000000010046350

NOTE:

The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II

User Guide for additional information.

• Activate and display TPMS transmitter IDs

• Display tire pressure reported by the TPMS transmitter

• Read TPMS DTCs

• Register TPMS transmitter IDs

MALFUNCTION CODE NO. 52 (DTC C1729)

1.

CHECK SELF-DIAGNOSTIC RESULTS

1. On “SELECT DIAG MODE”, select the “SELF-DIAG RESULT” screen.

2. Check display contents on “SELF DIAG RESULT” screen.
Is the “CAN COMM CIRCUIT” displayed in the self-diagnosis display?

YES

>> Perform trouble diagnosis for CAN communication system. Refer to 

LAN-15, "Trouble Diagnosis

Flow Chart"

.

NO

>> Check combination meter. Refer to 

MWI-29, "CONSULT Function (METER/M&A)"

.

Special Repair Requirement

INFOID:0000000010046351

Perform preliminary check. Refer to 

WT-5, "Preliminary Check"

.

DTC

CONSULT

DTC detecting condition

C1729

VHCL SPEED SIG ERR

Vehicle speed signal is in error.

WT-20

< DTC/CIRCUIT DIAGNOSIS >

C1734 CONTROL UNIT

C1734 CONTROL UNIT

Description

INFOID:0000000010046352

An internal malfunction has been detected in the TPMS function of the BCM.

DTC Logic

INFOID:0000000010046353

NOTE:

The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II

User Guide for additional information.

• Activate and display TPMS transmitter IDs

• Display tire pressure reported by the TPMS transmitter

• Read TPMS DTCs

• Register TPMS transmitter IDs

DTC DETECTION LOGIC

DTC CONFIRMATION PROCEDURE

1.

CHECK SELF-DIAGNOSTIC RESULTS

1. On “SELECT DIAG MODE”, select the “SELF-DIAG RESULT” screen.

2. Check display contents on “SELF DIAG RESULT” screen.
Is C1734 displayed in the self-diagnosis display?

YES

>> Refer to 

WT-20, "Diagnosis Procedure"

.

NO

>> Inspection End.

Diagnosis Procedure

INFOID:0000000010046354

NOTE:

The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II

User Guide for additional information.

• Activate and display TPMS transmitter IDs

• Display tire pressure reported by the TPMS transmitter

• Read TPMS DTCs

• Register TPMS transmitter IDs

Regarding Wiring Diagram information, refer to 

WT-46, "Wiring Diagram"

.

MALFUNCTION CODE NO. 53 (DTC C1734)

1.

SELF-DIAGNOSTIC RESULTS

1. On “SELECT DIAG” mode, select the “SELF-DIAG RESULT” screen for BCM.

2. Check display contents on “SELF-DIAG RESULT”.
Does self-diagnostic results indicate any DTC other than C1734?

YES

>> Perform trouble diagnosis for DTC. Refer to 

BCS-64, "DTC Index"

.

NO

>> GO TO 2.

2.

CHECK BCM HARNESS CONNECTORS

Check BCM harness connectors for damage or loose connections.
Are the BCM harness connectors damaged or loose?

YES

>> Repair or replace damaged parts.

NO

>> GO TO 3.

3.

BCM POWER SUPPLY AND GROUND

DTC

CONSULT

DTC detecting condition

C1734

CONTROL UNIT

TPMS malfunction in BCM.