|
|
Content .. 1204 1205 1206 1207 ..
C1708 - C1711 DATA FROM TRANSMITTER NOT BEING RECEIVED WT-13 < DTC/CIRCUIT DIAGNOSIS > C D F G H I J K L M A B WT N O P DTC/CIRCUIT DIAGNOSIS C1708 - C1711 DATA FROM TRANSMITTER NOT BEING RECEIVED Description INFOID:0000000010046336 Tire pressure data for one or more transmitters is not being received by the BCM. DTC Logic INFOID:0000000010046337 NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information. • Activate and display TPMS transmitter IDs • Display tire pressure reported by the TPMS transmitter • Read TPMS DTCs • Register TPMS transmitter IDs DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1. ID REGISTRATION AND VEHICLE DRIVING 1. Carry out ID registration of all transmitters. Refer to WT-6, "ID Registration Procedure" . 2. Drive at a speed of 40 km/h (25 MPH) or more for 3 minutes, and then drive the vehicle at any speed for 10 minutes. 3. Check all tire pressures with CONSULT within 5 minutes. YES >> Inspection End. NO >> Refer to . Diagnosis Procedure INFOID:0000000010046338 NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information. • Activate and display TPMS transmitter IDs • Display tire pressure reported by the TPMS transmitter • Read TPMS DTCs • Register TPMS transmitter IDs MALFUNCTION CODE NO. 21, 22, 23 OR 24 (DTC C1708, C1709, C1710 OR C1711) 1. CHECK BCM Drive for several minutes. Check all tire pressures with CONSULT. YES >> GO TO 2 NO >> GO TO 3 2. CHECK TIRE PRESSURE RECEIVER CONNECTOR Check tire pressure receiver connector for damage or loose connections. DTC CONSULT DTC detecting condition C1708 [NO - DATA] - FL Data from FL transmitter cannot be received. C1709 [NO - DATA] - FR Data from FR transmitter cannot be received. C1710 [NO - DATA] - RR Data from RR transmitter cannot be received. C1711 [NO - DATA] - RL Data from RL transmitter cannot be received. |