Nissan Sentra. Manual - part 321

 

  Index      Nissan     Nissan Sentra (2014 year) - Service and Repair Manual

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  319  320  321  322   ..

 

 

Nissan Sentra. Manual - part 321

 

 

DMS-56

< DTC/CIRCUIT DIAGNOSIS >

[SPORT MODE (M/T)]

SPORT MODE SWITCH

Is the inspection result normal?

YES

>> INSPECTION END

NO

>> Replace SPORT mode switch. Refer to 

DMS-58, "Removal and Installation"

.

SPORT mode 

switch

Condition

Continuity

Terminal

6 – 8

SPORT mode switch is de-
pressed.

Existed

SPORT mode switch is released.

Not existed

DMS

SPORT MODE

DMS-57

< DTC/CIRCUIT DIAGNOSIS >

[SPORT MODE (M/T)]

C

D

E

F

G

H

I

J

K

L

M

B

N

P

A

SPORT MODE

Component Function Check

INFOID:0000000009755932

1.

 CHECK SPORT MODE OPERATION

1. Turn ignition switch ON.

2. Check SPORT mode indicator lamp turns ON/OFF on combination meter when turn SPORT mode switch

ON/OFF.

Is the inspection result normal?

YES

>> INSPECTION END.

NO

>> Proceed to 

DMS-57, "Diagnosis Procedure"

.

Diagnosis Procedure

INFOID:0000000009755933

1.

CHECK DTC IN ECM

With CONSULT

Check “Self Diagnostic Results” in “ENGINE”.
Are any DTC detected?

YES

>> Check DTC detected item. Refer to 

EC-94, "DTC Index"

.

NO

>> GO TO 2.

2.

CHECK DTC IN COMBINATION METER

With CONSULT

Check “Self Diagnostic Results” in “METER/M&A”.
Is any DTC detected?

YES

>> Check DTC detected item. Refer to 

MWI-26, "DTC Index"

.

NO

>> GO TO 3.

3.

CHECK COMBINATION METER

With CONSULT

1. Select “Data Monitor” in “METER/M&A”.

2. Check that “SPORT MODE IND” turns ON/OFF when SPORT mode switch is operated. Refer to 

MWI-20,

"Reference Value"

.

Is the inspection result normal?

YES

>> Replace combination meter. Refer to 

MWI-77, "Removal and Installation"

.

NO

>> GO TO 4.

4.

CHECK SPORT MODE SWITCH SYSTEM

Check SPORT mode switch system. Refer to 

DMS-53, "Component Function Check"

.

Is the inspection result normal?

YES

>> INSPECTION END

NO

>> Repair or replace error-detected parts.

DMS-58

< REMOVAL AND INSTALLATION >

[SPORT MODE (M/T)]

SPORT MODE SWITCH

REMOVAL AND INSTALLATION

SPORT MODE SWITCH

Removal and Installation

INFOID:0000000009755934

REMOVAL

1. Remove instrument lower panel LH. Refer to 

IP-21, "Removal and Installation"

.

2. Remove SPORT mode switch.

INSTALLATION

Installation is in the reverse order of removal.

DMS

PRECAUTIONS

DMS-59

< PRECAUTION >

[SPORT MODE (CVT)]

C

D

E

F

G

H

I

J

K

L

M

B

N

P

A

PRECAUTION

PRECAUTIONS

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT 
PRE-TENSIONER"

INFOID:0000000010291076

The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along

with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain

types of collision. Information necessary to service the system safely is included in the SR and SB section of

this Service Manual.

WARNING:

• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in

the event of a collision which would result in air bag inflation, all maintenance must be performed by

an authorized NISSAN/INFINITI dealer.

• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal

injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag

Module, see the SR section.

• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this

Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-

ness connectors.

PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS

WARNING:

• When working near the Airbag Diagnosis Sensor Unit or other Airbag System sensors with the Igni-

tion ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s) with a

hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing

serious injury.

• When using air or electric power tools or hammers, always switch the Ignition OFF, disconnect the

battery and wait at least three minutes before performing any service.

 

 

 

 

 

 

 

Content   ..  319  320  321  322   ..