Content .. 200 201 202 203 ..

Nissan Primera P11. Manual - part 202

Items

(CONSULT-II screen terms)

DTC*6

Reference page

CONSULT-II

GST*2

ECM*1

PNP SW/CIRC *7

P0705

0705

Refer to AT section.

PURG VOLUME CONT/V *7

P0443

0443

EC-SR-250

HO2S2 (B1) *7

P0137

0137

EC-SR-180

HO2S2 (B1) *7

P0138

0138

EC-SR-187

HO2S2 (B1) *7

P0139

0139

EC-SR-194

HO2S2 (B1) *7

P0140

0140

EC-SR-201

HO2S2 HTR (B1) *7

P0141

0141

EC-SR-207

STEP MOTOR CIRC -B1 *7

P1777

1777

Refer to AT section.

STEP MOTOR FNC *7

P1778

1778

Refer to AT section.

TCC SOLENOID/CIRC *7

P0740

0740

Refer to AT section.

THRTL POS SEN/CIRC *3

P0120

0120

EC-SR-137

TP SEN/CIRC A/T *7

P1705

1705

Refer to AT section.

TW CATALYST SYSTEM *7

P0420

0420

EC-SR-246

VEH SPD SEN/CIR AT *4 *7

P0720

0720

Refer to AT section.

VEH SPEED SEN/CIRC *4

P0500

0500

EC-SR-255

*1: In Diagnostic Test Mode II (Self-diagnostic results). These numbers are controlled by NISSAN.
*2: These numbers are prescribed by ISO 15031-6.
*3: When the fail-safe operation occurs, the MI illuminates.
*4: The MI illuminates when the “Secondary speed sensor signal” and the “Vehicle speed sensor signal” meet the fail-safe condition at

the same time.

*5: While engine is running.
*6: 1st trip DTC No. is the same as DTC No.
*7: Not available for “Eastern Europe models”.

P NO. INDEX FOR DTC

NCEC0001S02

DTC*6

Items

(CONSULT-II screen terms)

Reference page

CONSULT-II

GST*2

ECM*1

—

Unable to access ECM

EC-SR-93

No DTC

Flashing*5

NO SELF DIAGNOSTIC FAILURE INDICATED

EC-SR-59

P0000

0000

NO SELF DIAGNOSTIC FAILURE INDICATED

—

P0100

0100

MAF SEN/CIRCUIT*3

EC-SR-120

P0110

0110

AIR TEMP SEN/CIRC *7

EC-SR-127

P0115

0115

COOLANT T SEN/CIRC *3

EC-SR-132

P0120

0120

THRTL POS SEN/CIRC *3

EC-SR-137

P0130

0130

HO2S1 (B1)

EC-SR-144

P0131

0131

HO2S1 (B1) *7

EC-SR-150

P0132

0132

HO2S1 (B1) *7

EC-SR-156

P0133

0133

HO2S1 (B1) *7

EC-SR-162

P0134

0134

HO2S1 (B1) *7

EC-SR-170

P0135

0135

HO2S1 HTR (B1) *7

EC-SR-175

TROUBLE DIAGNOSIS — INDEX

SR20DE

Alphabetical & P No. Index for DTC (Cont’d)

EC-7

DTC*6

Items

(CONSULT-II screen terms)

Reference page

CONSULT-II

GST*2

ECM*1

P0137

0137

HO2S2 (B1) *7

EC-SR-180

P0138

0138

HO2S2 (B1) *7

EC-SR-187

P0139

0139

HO2S2 (B1) *7

EC-SR-194

P0140

0140

HO2S2 (B1) *7

EC-SR-201

P0141

0141

HO2S2 HTR (B1) *7

EC-SR-207

P0171

0171

FUEL SYS -LEAN/BK1 *7

EC-SR-212

P0172

0172

FUEL SYS -RICH/BK1 *7

EC-SR-218

P0300

0300

MULTI CYL MISFIRE *7

EC-SR-224

P0301

0301

CYL 1 MISFIRE *7

EC-SR-224

P0302

0302

CYL 2 MISFIRE *7

EC-SR-224

P0303

0303

CYL 3 MISFIRE *7

EC-SR-224

P0304

0304

CYL 4 MISFIRE *7

EC-SR-224

P0325

0325

KNOCK SEN/CIRC -B1

EC-SR-230

P0335

0335

CPS/CIRCUIT (POS) *7

EC-SR-234

P0340

0340

CAM POS SEN/CIRC

EC-SR-239

P0420

0420

TW CATALYST SYS -B1 *7

EC-SR-246

P0443

0443

PURG VOLUME CONT/V *7

EC-SR-250

P0500

0500

VEH SPEED SEN/CIRC *4

EC-SR-255

P0505

0505

IACV/AAC VLV/CIRC *7

EC-SR-263

P0510

0510

CLOSED TP SW/CIRC *7

EC-SR-271

P0605

0605

ECM *7

EC-SR-277

P0705

0705

PNP SW/CIRC *7

Refer to AT section.

P0710

0710

ATF TEMP SEN/CIRC *7

Refer to AT section.

P0715

0715

IN PY SPD SEN/CIRC *7

Refer to AT section.

P0720

0720

VEH SPD SEN/CIR AT *4 *7

Refer to AT section.

P0725

0725

ENGINE SPEED SIG *7

Refer to AT section.

P0740

0740

TCC SOLENOID/CIRC *7

Refer to AT section.

P0745

0745

L/PRESS SOL/CIRC *7

Refer to AT section.

P1217

1217

ENG OVER TEMP

EC-SR-279

P1336

1336

CPS/CIRC (OBD) COG *7

EC-SR-290

TROUBLE DIAGNOSIS — INDEX

SR20DE

Alphabetical & P No. Index for DTC (Cont’d)

EC-8

P1605

1605

A/T DIAG COMM LINE *7

EC-SR-295

P1610 - 1615

1610 - 1615

NATS MALFUNCTION

Refer to EL section.

P1705

1705

TP SEN/CIRC A/T *7

Refer to AT section.

P1706

1706

P-N POS SW/CIRCUIT *7

EC-SR-298

P1777

1777

STEP MOTOR CIRC *7

Refer to AT section.

P1778

1778

STEP MOTOR FNC *7

Refer to AT section.

P1791

1791

LINE PRESS SE *7

Refer to AT section.

unit (control unit) signal” meet the fail-safe condition at the same time.

*5: While engine is running.
*6: 1st trip DTC No. is the same as DTC No.
*7: Not available for “Eastern Europe models”.

TROUBLE DIAGNOSIS — INDEX

SR20DE

Alphabetical & P No. Index for DTC (Cont’d)

EC-9

Supplemental Restraint System (SRS) “AIR
BAG” and “SEAT BELT PRE-TENSIONER”

NCEC0002

The Supplemental Restraint System “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a seat
belt, help to reduce the risk or severity of injury to the driver and front passenger in a frontal collision. The
Supplemental Restraint System consists of air bag modules (located in the center of the steering wheel and
on the instrument panel on the passenger side), seat belt pre-tensioners, a diagnosis sensor unit, warning
lamp, wiring harness and spiral cable.
In addition to the supplemental air bag modules for a frontal collision, the supplemental side air bag used along
with the seat belt helps to reduce the risk or severity of injury to the driver and front passenger in a side col-
lision. The supplemental side air bag consists of air bag modules (located in the outer side of front seats),
satellite sensor, diagnosis sensor unit (one of components of supplemental air bags for a frontal collision),
wiring harness, warning lamp (one of components of supplemental air bags for a frontal collision). Information
necessary to service the system safely is included in the RS section of this Service Manual.

WARNING:

To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death
in the event of a collision which would result in air bag inflation, all maintenance must be performed
by an authorized NISSAN dealer.

Improper maintenance, including incorrect removal and installation of the SRS, can lead to per-
sonal injury caused by unintentional activation of the system.

Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses (except “SEAT BELT PRE-TENSIONER” connector) can be
identified with yellow harness connector (and with yellow harness protector or yellow insulation
tape before the harness connectors).

Precautions for On Board Diagnostic (OBD)
System of Engine and CVT

NCEC0003

The ECM has an on board diagnostic system. It will light up the malfunction indicator (MI) to warn the driver
of a malfunction causing emission deterioration.

CAUTION:

Be sure to turn the ignition switch “OFF” and disconnect the negative battery terminal before any
repair or inspection work. The open/short circuit of related switches, sensors, solenoid valves, etc.
will cause the MI to light up.

Be sure to connect and lock the connectors securely after work. A loose (unlocked) connector will
cause the MI to light up due to the open circuit. (Be sure the connector is free from water, grease,
dirt, bent terminals, etc.)

Certain systems and components, especially those related to OBD, may use a new style slide-
locking type harness connector.
For description and how to disconnect, refer to EL section, “Description”, “HARNESS CONNEC-
TOR”.

Be sure to route and secure the harnesses properly after work. The interference of the harness with
a bracket, etc. may cause the MI to light up due to the short circuit.

Be sure to connect rubber tubes properly after work. A misconnected or disconnected rubber tube
may cause the MI to light up due to the malfunction of the fuel injection system, etc.

Be sure to erase the unnecessary malfunction information (repairs completed) from the ECM and
TCM (Transmission Control Module) before returning the vehicle to the customer.

PRECAUTIONS

SR20DE

Supplemental Restraint System (SRS) “AIR BAG” and “SEAT BELT PRE-TENSIONER”

EC-10

Content .. 200 201 202 203 ..