GW-16
POWER WINDOW
AUTO OPERATION
The power window AUTO feature enables the driver to lower the driver window without holding the switch in
the DOWN position.
The AUTO feature is activated by pressing the switch beyond the DOWN position to the AUTO position.
The AUTO feature only operates on the downward movement of the driver window.
The window can be stopped before it is fully open by pressing the window switch to the UP position.
POWER WINDOW LOCK
The power window lock prevents operation of all windows except the driver window.
When the lock switch is pressed to lock position, ground circuit for the front power window switch RH, the rear
power window switch LH (Crew Cab), and the rear power window switch RH (Crew Cab) is disconnected in
the main power window and door lock/unlock switch. This prevents the front power window motor RH, the rear
power window motor LH (Crew Cab), and the rear power window motor RH (Crew Cab) from operating.
RETAINED ACCESSORY POWER (RAP) OPERATION (WITH POWER DOOR LOCKS)
When the ignition switch is turned to the OFF position from the ON or START position, power is supplied for 45
seconds
●
to power window relay terminal 2
●
from smart entrance control unit terminal 46.
Ground is supplied
●
to power window relay terminal 1
●
through body grounds M14 and M68.
With power and ground supplied, the power window relay continues to be energized, and the power window
can be operated.
The retained power operation is cancelled when the driver or passenger side door is opened.