Nissan Almera Tino V10. Manual - part 144

EC-936, "Idle Speed and
Ignition Timing"

2. Engine idling rpm

3. Throttle position sensor (Accelerator
pedal position (APP) sensor)

AT-356, "ACCELE
RATOR PEDAL POSI-
TION (APP) SENSOR"

4. Line pressure test

AT-392, "LINE PRES-
SURE SOLENOID
VALVE"

5. Line pressure solenoid valve

6. Control valve assembly

AT-410, "Control Valve
Assembly and Accumula-
tors"

OFF vehicle

7. Oil pump

AT-439, "Oil Pump"

8. Reverse clutch

AT-459, "Reverse Clutch"

9. High clutch

AT-463, "High Clutch"

10. Brake band

11. Forward clutch

12. Overrun clutch

AT-474, "Low & Reverse
Brake"

13. Low & reverse brake

14. Torque converter

AT-421, "Locations of
Adjusting Shims, Needle
Bearings, Thrust Washers
and Snap Rings"

ATF shoots out during operation.
White smoke emitted from exhaust
pipe during operation.

ON vehicle

1. Fluid level

OFF vehicle

2. Reverse clutch

AT-459, "Reverse Clutch"

3. High clutch

AT-463, "High Clutch"

4. Brake band

5. Forward clutch

6. Overrun clutch

AT-474, "Low & Reverse
Brake"

7. Low & reverse brake

Symptom

Condition

Diagnostic Item

Reference Page

TROUBLE DIAGNOSIS — GENERAL DESCRIPTION

AT-301

[EXC.F/EURO-OBD]

Offensive smell at fluid charging pipe.

ON vehicle

1. Fluid level

AT-421, "Locations of
Adjusting Shims, Needle
Bearings, Thrust Washers
and Snap Rings"

OFF vehicle

2. Torque converter

3. Oil pump

AT-439, "Oil Pump"

4. Reverse clutch

AT-459, "Reverse Clutch"

5. High clutch

AT-463, "High Clutch"

6. Brake band

7. Forward clutch

8. Overrun clutch

AT-474, "Low & Reverse
Brake"

9. Low & reverse brake

Torque converter is not locked up.

ON vehicle

1. Throttle position sensor (Accelerator
pedal position (APP) sensor)

AT-356, "ACCELE
RATOR PEDAL POSI-
TION (APP) SENSOR"

2. Vehicle speed sensor·A/T (Revolution
sensor) and vehicle speed sensor·MTR

AT-347, "VEHICLE
SPEED SENSOR - A/T
(REVOLUTION SEN-
SOR)"

AT-352, "DTC

VEHICLE SPEED SEN-
SOR MTR"

3. PNP switch adjustment

AT-412, "Park/Neutral
Position (PNP) Switch
Adjustment"

4. Engine speed signal

AT-387, "ENGINE SPEED
SIGNAL"

5. A/T fluid temp sen circ and TCM pow
sour

AT-381, "BATT/FLUID
TEMP SEN (A/T FLUID
TEMP SENSOR CIR-
CUIT AND TCM POWER
SOURCE)"

6. Line pressure test

7. Torque converter clutch solenoid valve

AT-410, "Control Valve
Assembly and Accumula-
tors"

8. Control valve assembly

OFF vehicle

9. Torque converter

AT-421, "Locations of
Adjusting Shims, Needle
Bearings, Thrust Washers
and Snap Rings"

Symptom

Condition

Diagnostic Item

Reference Page

AT-302

[EXC.F/EURO-OBD]

TROUBLE DIAGNOSIS — GENERAL DESCRIPTION

Torque converter clutch piston slip.

ON vehicle

1. Fluid level

AT-356, "ACCELE
RATOR PEDAL POSI-
TION (APP) SENSOR"

2. Throttle position sensor (Accelerator
pedal position (APP) sensor)

3. Line pressure test

4. Torque converter clutch solenoid valve

AT-392, "LINE PRES-
SURE SOLENOID
VALVE"

5. Line pressure solenoid valve

6. Control valve assembly

AT-410, "Control Valve
Assembly and Accumula-
tors"

OFF vehicle

7. Torque converter

AT-421, "Locations of
Adjusting Shims, Needle
Bearings, Thrust Washers
and Snap Rings"

Lock-up point is extremely high or low.

AT-330, "12. A/T Does Not Perform
Lock-up"

ON vehicle

1. Throttle position sensor (Accelerator
pedal position (APP) sensor) Adjustment

AT-356, "ACCELE
RATOR PEDAL POSI-
TION (APP) SENSOR"

2. Vehicle speed sensor·A/T (Revolution
sensor) and vehicle speed sensor·MTR

AT-347, "VEHICLE
SPEED SENSOR - A/T
(REVOLUTION SEN-
SOR)"

AT-352, "DTC

VEHICLE SPEED SEN-
SOR MTR"

3. Torque converter clutch solenoid valve

AT-410, "Control Valve
Assembly and Accumula-
tors"

4. Control valve assembly

Symptom

Condition

Diagnostic Item

Reference Page

TROUBLE DIAGNOSIS — GENERAL DESCRIPTION

AT-303

[EXC.F/EURO-OBD]

A/T does not shift to “D

” when driv-

ing with overdrive control switch “ON”.

ON vehicle

1. Throttle position sensor (Accelerator
pedal position (APP) sensor)

AT-356, "ACCELE
RATOR PEDAL POSI-
TION (APP) SENSOR"

2. PNP switch adjustment

AT-412, "Park/Neutral
Position (PNP) Switch
Adjustment"

3. Vehicle speed sensor·A/T (Revolution
sensor) and vehicle speed sensor·MTR

AT-347, "VEHICLE
SPEED SENSOR - A/T
(REVOLUTION SEN-
SOR)"

AT-352, "DTC

VEHICLE SPEED SEN-
SOR MTR"

4. Shift solenoid valve A

AT-361, "SHIFT SOLE-
NOID VALVE A"

5. Overrun clutch solenoid valve

AT-371, "OVERRUN
CLUTCH SOLENOID
VALVE"

6. Control valve assembly

AT-410, "Control Valve
Assembly and Accumula-
tors"

7. A/T fluid temp sen circ and TCM pow
sour

AT-381, "BATT/FLUID
TEMP SEN (A/T FLUID
TEMP SENSOR CIR-
CUIT AND TCM POWER
SOURCE)"

8. Line pressure test

OFF vehicle

9. Brake band

10. Overrun clutch

Engine is stopped at “R”, “D”, “2” and
“1” positions.

ON vehicle

1. Fluid level

2. Torque converter clutch solenoid valve