Nissan Teana J32. Manual - part 976
HEATED SEAT SWITCH INDICATOR
SE-37
< COMPONENT DIAGNOSIS >
[WITH VENTILATION SEAT]
C
D
E
F
G
H
I
K
L
M
A
B
SE
N
O
P
HEATED SEAT SWITCH INDICATOR
FRONT SEAT
FRONT SEAT : Description
INFOID:0000000003841922
Illuminates the indicator that indicates the operating status of front heated seat LO or HI mode.
FRONT SEAT : Component Function Check
INFOID:0000000003841923
1.
CHECK FUNCTION
Check that the related indicator lamp illuminates when front heated seat switch is set to LO or HI mode.
Is the inspection result normal?
YES
>> Front heated seat switch indicator function is OK.
NO
>> Refer to
SE-37, "FRONT SEAT : Diagnosis Procedure"
.
FRONT SEAT : Diagnosis Procedure
INFOID:0000000003841924
1.
CHECK FRONT HEATED SEAT SWITCH INDICATOR
Check front heated seat switch indicator.
Which side of the indicator does not illuminate?
Only LO mode or HI mode>> GO TO 3.
Both LO mode and HI mode>> GO TO 2.
2.
CHECK FRONT HEATED SEAT SWITCH INDICATOR POWER SUPPLY
1.
Turn ignition switch OFF.
2.
Disconnect front heated seat switch connector.
3.
Turn ignition switch ON.
4.
Check voltage between front heated seat switch harness connector and ground.
Is the inspection result normal?
YES
>> GO TO 3.
NO
>> Repair or replace harness.
3.
CHECK FRONT HEATED SEAT SWITCH
Check front heated seat switch.
Refer to
SE-38, "FRONT SEAT : Component Inspection"
.
Is the inspection result normal?
YES-1 >> LO or HI mode is NG: GO TO 4.
YES-2 >> LO and HI modes are NG: INSPECTION END
NO
>> Replace front heated seat switch. Refer to
SE-104, "FRONT SEAT : Removal and Installation"
.
4.
CHECK FRONT HEATED SEAT SWITCH INDICATOR CIRCUIT
1.
Turn ignition switch OFF.
2.
Disconnect front ventilation seat control unit connector.
3.
Check continuity between front heated seat switch harness connector and front ventilation seat control
unit harness connector.
(+)
(–)
Voltage (V)
(Approx.)
Front heated seat switch
Connector
Terminal
Driver side
M206
6
Ground
Battery voltage
Passenger side
M207