|
|
INT-8 < COMPONENT DIAGNOSIS > REAR SUNSHADE SWITCH Is the inspection result normal? YES >> Replace rear sunshade control unit. Refer to INT-61, "Removal and Installation" . NO >> Repair or replace harness. 4. CHECK REAR SUNSHADE SWITCH (FRONT) Check rear sunshade switch (front). Refer to INT-8, "FRONT : Component Inspection" . Is the inspection result normal? YES >> GO TO 5. NO >> Replace rear sunshade switch (front). Refer to INT-62, "FRONT : Removal and Installation" 5. CHECK INTERMITTENT INCIDENT GI-35, "Intermittent Incident" >> INSPECTION END FRONT : Component Inspection INFOID:0000000003819272 1. .CHECK REAR SUNSHADE SWITCH (FRONT) 1. Turn ignition switch OFF. 2. Disconnect rear sunshade switch (front) connector. 3. Check continuity between rear sunshade switch (front) terminals. Is the inspection result normal? YES >> INSPECTION END NO >> Replace rear sunshade switch (front). Refer to INT-62, "FRONT : Removal and Installation" REAR REAR : Description INFOID:0000000003866169 When rear sunshade switch (rear) is operated, rear sunshade motor is activated. REAR : Component Function Check INFOID:0000000003866170 1. CHECK REAR SUNSHADE FUNCTION Check that rear sunshade moves upwards and downwards when rear sunshade switch (rear) is operated. Is the inspection result normal? YES >> Rear sunshade function is OK. NO >> Refer to INT-8, "REAR : Diagnosis Procedure" . REAR : Diagnosis Procedure INFOID:0000000003820123 1. CHECK REAR SUNSHADE SWITCH (REAR) POWER SUPPLY CIRCUIT 1. Turn ignition switch OFF. Rear sunshade switch (front) Ground Continuity Connector Terminal M211 3 Not existed 4 Rear sunshade switch (front) Condition Continuity Terminal 3 1 UP Existed NEUTRAL Not existed 4 DOWN Existed NEUTRAL Not existed |