Nissan Teana J32. Manual - part 593

EXL-342

< ON-VEHICLE MAINTENANCE >

[HALOGEN TYPE]

FRONT FOG LAMP AIMING ADJUSTMENT

A

: Cutoff line

B

: High illuminance area

H

: Horizontal center line of front fog lamp

V

: Vertical center line of front fog lamp

X

: Cutoff line height

FRONT COMBINATION LAMP

EXL-343

< ON-VEHICLE REPAIR >

[HALOGEN TYPE]

C

D

E

F

G

H

I

J

K

M

A

B

EXL

N

O

P

ON-VEHICLE REPAIR

FRONT COMBINATION LAMP

Exploded View

INFOID:0000000003773730

REMOVAL

DISASSEMBLY

Removal and Installation

INFOID:0000000003773731

REMOVAL

CAUTION:

Disconnect the battery negative terminal or remove the fuse.

1.

Front combination lamp

JPLIA1087ZZ

1.

Front turn signal lamp bulb

2.

Front turn signal lamp bulb socket

3.

Halogen bulb (HI)

4.

Seal packing

5.

Resin cap

6.

Halogen bulb (LO)

7.

Parking lamp bulb socket

8.

Parking lamp bulb

9.

Headlamp housing assembly

JPLIA1105ZZ

EXL-344

< ON-VEHICLE REPAIR >

[HALOGEN TYPE]

FRONT COMBINATION LAMP

1.

Remove the front bumper fascia. Refer to 

EXT-11, "Exploded View"

.

2.

Remove the headlamp mounting bolts.

3.

Remove the harness clips from the headlamp housing.

4.

Pull out the headlamp assembly forward the vehicle. 

5.

Disconnect the connector before removing the headlamp assembly. 

INSTALLATION

Install in the reverse order of removal.
NOTE:
After installation, perform aiming adjustment. Refer to 

EXL-336, "Description"

.

Replacement

INFOID:0000000003773732

CAUTION:

• Disconnect the battery negative terminal or remove the fuse.
• After installing the bulb, install the resin cap and the bulb socket securely for watertightness.
• Never touch the glass of bulb directly by hand. Keep grease and other oily matters away from it.
• Never touch bulb by hand while it is lit or right after being turned off.
• Never leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect

the performance of lamp. When replacing bulb, be sure to replace it with new one.

HEADLAMP BULB (LO)

1.

Remove the fender protector. Keep a service area. Refer to 

EXT-22, "FENDER PROTECTOR : Exploded

View"

.

2.

Rotate the resin cap counterclockwise and unlock it.

3.

Disconnect the headlamp bulb (LO) connector.

4.

Rotate the bulb counterclockwise and unlock it.

5.

Remove the bulb from the headlamp housing.

HEADLAMP BULB (HI)

1.

Remove the fender protector. Keep a service area. Refer to 

EXT-22, "FENDER PROTECTOR : Exploded

View"

.

2.

Disconnect the headlamp bulb (HI) connector.

3.

Rotate the bulb counterclockwise and unlock it.

4.

Remove the bulb from the headlamp housing.

PARKING LAMP BULB

1.

Remove the fender protector. Keep a service area. Refer to 

EXT-22, "FENDER PROTECTOR : Exploded

View"

.

2.

Rotate the parking lamp bulb socket counterclockwise and unlock it.

3.

Remove the bulb from the parking lamp bulb socket.

FRONT TURN SIGNAL LAMP BULB

1.

Remove the relay box cover

*

. Refer to 

PCS-34, "Exploded View"

.

*: When replace a left

2.

Rotate the front turn signal lamp bulb socket counterclockwise and unlock it.

3.

Remove the bulb from the front turn signal lamp bulb socket.

Disassembly and Assembly

INFOID:0000000003773733

DISASSEMBLY

1.

Rotate the resin cap counterclockwise and unlock it

2.

Disconnect the headlamp bulb (LO) connector.

3.

Rotate the headlamp bulb (LO) counterclockwise and unlock it

4.

Remove the bulb from the headlamp housing.

5.

Rotate the headlamp bulb (HI) counterclockwise and unlock it

FRONT COMBINATION LAMP

EXL-345

< ON-VEHICLE REPAIR >

[HALOGEN TYPE]

C

D

E

F

G

H

I

J

K

M

A

B

EXL

N

O

P

6.

Remove the bulb from the headlamp housing.

7.

Rotate the parking lamp bulb socket counterclockwise and unlock it.

8.

Remove the bulb from the parking lamp bulb socket.

9.

Rotate the front turn signal lamp bulb socket counterclockwise and unlock it.

10. Remove the bulb from the front turn signal lamp bulb socket.

ASSEMBLY

Assemble in the reverse order of disassembly.