Nissan Teana J32. Manual - part 346

 

  Index      Nissan     Nissan Teana J32 (2008 year) - Service and Repair Manual

 

Search            

 

 

 

 

 

 

 

 

 

Content   ..  344  345  346  347   ..

 

 

Nissan Teana J32. Manual - part 346

 

 

HAZARD AND BUZZER REMINDER DOES NOT OPERATE

DLK-167

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

HAZARD AND BUZZER REMINDER DOES NOT OPERATE

Description

INFOID:0000000003795012

NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to 

DLK-7, "Work

Flow"

.

• Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and

check each symptom.

CONDITIONS OF VEHICLE (OPERATING CONDITIONS)

• Intelligent Key is removed from key slot.
• Ignition switch is in OFF position.
• No Intelligent Keys are inside the vehicle.

Diagnosis Procedure

INFOID:0000000003795013

1.

CHECK “HAZARD ANSWER BACK” SETTING IN “WORK SUPPORT”

Check “HAZARD ANSWER BACK” setting in “WORK SUPPORT”.
Refer to 

DLK-42, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK)"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Set “HAZARD ANSWER BACK” in “WORK SUPPORT”.

2.

CHECK “ANS BACK I-KEY LOCK” SETTING IN “WORK SUPPORT”

Check “ANS BACK I-KEY LOCK” setting in “WORK SUPPORT”.
Refer to 

DLK-42, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK)"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Set “ANS BACK I-KEY LOCK” in “WORK SUPPORT”.

3.

CHECK “ANS BACK I-KEY UNLOCK” SETTING IN “WORK SUPPORT”

Check “ANS BACK I-KEY UNLOCK” setting in “WORK SUPPORT”.
Refer to 

DLK-42, "DOOR LOCK : CONSULT-III Function (BCM - DOOR LOCK)"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Set “ANS BACK I-KEY UNLOCK” in “WORK SUPPORT”.

4.

CHECK HAZARD WARNING LAMP

Check hazard warning lamp.
Refer to 

DLK-96, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CHECK INTELLIGENT KEY WARNING BUZZER

Check Intelligent Key warning buzzer.
Refer to 

DLK-82, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Repair or replace the malfunctioning parts.

6.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-35, "Intermittent Incident"

.

NO

>> GO TO 1.

DLK-168

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

KEY REMINDER FUNCTION DOES NOT OPERATE

KEY REMINDER FUNCTION DOES NOT OPERATE

Description

INFOID:0000000003795014

NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to 

DLK-7, "Work

Flow"

.

• Understand how the operation when properly functions. Refer to 

DLK-28, "KEY REMINDER FUNCTION :

System Description"

.

Diagnosis Procedure

INFOID:0000000003795015

1.

CHECK “ANTI KEY LOCK IN FUNCTI” SETTING IN “WORK SUPPORT”

Check “ANTI KEY LOCK IN FUNCTI” setting in “WORK SUPPORT”.
Refer to 

DLK-43, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Set “ANTI KEY LOCK IN FUNCTI” setting in “WORK SUPPORT”.

2.

CHECK DOOR SWITCH

Check door switch.
Refer to 

DLK-57, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK INSIDE KEY ANTENNA

Check inside key antenna.
Refer to 

DLK-50, "DTC Logic"

 (instrument center).

Refer to 

DLK-52, "DTC Logic"

 (console).

Refer to 

DLK-54, "DTC Logic"

 (trunk room).

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK UNLOCK SENSOR

Check unlock sensor.
Refer to 

DLK-78, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-35, "Intermittent Incident"

.

NO

>> GO TO 1.

KEY WARNING DOES NOT OPERATE

DLK-169

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

KEY WARNING DOES NOT OPERATE

Description

INFOID:0000000003795016

NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to 

DLK-7, "Work

Flow"

.

• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm

the list above twice in order to ensure proper operation. Refer to 

DLK-31, "WARNING FUNCTION : System

Description"

.

• Door lock function is normal.

Diagnosis Procedure

INFOID:0000000003795017

1.

CHECK BUZZER (COMBINATION METER)

Check buzzer (combination meter).
Refer to 

DLK-94, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK DOOR SWITCH

Check door switch (driver side).
Refer to 

DLK-57, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK KEY SLOT

Check key slot.
Refer to 

DLK-86, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK COMBINATION METER DISPLAY

Check combination meter display.
Refer to 

DLK-93, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CHECK KEY SLOT ILLUMINATION

Check key slot illumination.
Refer to 

DLK-88, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Repair or replace the malfunctioning parts.

6.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-35, "Intermittent Incident"

.

NO

>> GO TO 1.

DLK-170

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

OFF POSITION WARNING DOES NOT OPERATE

OFF POSITION WARNING DOES NOT OPERATE

Description

INFOID:0000000003795018

NOTE:
• Before performing the diagnosis in the following procedure, check “Work Flow”. Refer to 

DLK-7, "Work

Flow"

.

• Warning functions operating condition is extremely complicated, during operating confirmations, reconfirm

the list above twice in order to ensure proper operation. Refer to 

DLK-31, "WARNING FUNCTION : System

Description"

.

• Door lock function is normal.

Diagnosis Procedure

INFOID:0000000003795019

1.

CHECK POWER POSITION

Check if ignition switch position is changing or not.

Does ignition switch position change?

YES

>> GO TO 2.

NO

>> Check DTC for BCM. Refer to 

DLK-153, "DTC Index"

.

2.

CHECK BUZZER (COMBINATION METER)

Check buzzer (combination meter).
Refer to 

DLK-94, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK INTELLIGENT KEY WARNING BUZZER

Check Intelligent Key warning buzzer.
Refer to 

DLK-82, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

CHECK DOOR SWITCH

Check door switch (driver side).
Refer to 

DLK-57, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-35, "Intermittent Incident"

.

NO

>> GO TO 1.

 

 

 

 

 

 

 

Content   ..  344  345  346  347   ..