|
|
HAZARD AND HORN REMINDER DOES NOT OPERATE DLK-159 < SYMPTOM DIAGNOSIS > [WITH INTELLIGENT KEY SYSTEM] C D E F G H I J L M A B DLK N O P HAZARD AND HORN REMINDER DOES NOT OPERATE Description INFOID:0000000003795000 NOTE: • Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and check each symptom. CONDITIONS OF VEHICLE (OPERATION CONDITIONS) • Ignition switch is in the OFF or LOCK position. Diagnosis Procedure INFOID:0000000003795001 1. CHECK “HAZARD ANSWER BACK” SETTING IN “WORK SUPPORT” Check “HAZARD ANSWER BACK” setting in “WORK SUPPORT”. DLK-43, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)" . Is the inspection result normal? YES >> GO TO 2. NO >> Set “HAZARD ANSWER BACK” setting in “WORK SUPPORT”. 2. CHECK “HORN WITH KEYLESS LOCK” SETTING IN “WORK SUPPORT”. Check “HORN WITH KEYLESS LOCK” setting in “WORK SUPPORT”. DLK-43, "INTELLIGENT KEY : CONSULT-III Function (BCM - INTELLIGENT KEY)" . Is the inspection result normal? YES >> GO TO 3. NO >> Set “HORN WITH KEYLESS LOCK” setting in “WORK SUPPORT”. 3. CHECK HAZARD WARNING LAMP Check hazard warning lamp. DLK-96, "Component Function Check" . Is the inspection result normal? YES >> GO TO 4. NO >> Repair or replace the malfunctioning parts. 4. CHECK HORN Check horn. DLK-91, "Component Function Check" . Is the inspection result normal? YES >> GO TO 5. NO >> Repair or replace the malfunctioning parts. 5. CONFIRM THE OPERATION Confirm the operation again. Is the result normal? YES >> Check intermittent incident. Refer to GI-35, "Intermittent Incident" . NO >> GO TO 1. |