|
|
Content .. 1003 1004 1005 1006 ..
SEC-8 < BASIC INSPECTION > [INTELLIGENT KEY SYSTEM] INSPECTION AND ADJUSTMENT INSPECTION AND ADJUSTMENT ECM RE-COMMUNICATING FUNCTION ECM RE-COMMUNICATING FUNCTION : Description INFOID:0000000003814900 Performing the following procedure can automatically perform re-communication of ECM and BCM, but only ation Manual NATS-IVIS/NVIS. • If multiple keys are attached to the key holder, separate them before beginning work. ECM RE-COMMUNICATING FUNCTION : Special Repair Requirement INFOID:0000000003814901 1. PERFORM ECM RE-COMMUNICATING FUNCTION 1. Install ECM. 2. Insert the registered Intelligent Key (*2), turn ignition switch to “ON”. 3. Maintain ignition switch in the “ON” position for at least 5 seconds. 4. Turn ignition switch to “OFF”. 5. Start engine. Can engine be started? YES >> Procedure is completed. NO >> Initialize control unit. Refer to CONSULT-III Operation Manual NATS-IVIS/NVIS. |