Nissan Murano Z51. Manual - part 315

BRAKE WARNING LAMP

BRC-83

< DTC/CIRCUIT DIAGNOSIS >

[VDC/TCS/ABS]

C

D

E

G

H

I

J

K

L

M

A

B

BRC

N

O

P

BRAKE WARNING LAMP

Description

INFOID:0000000005517385

×

: ON –: OFF

NOTE:

• 1: Brake warning lamp will turn on in case of parking brake operation (when switch is ON) or of brake fluid level switch operation

(when brake fluid is insufficient).

• 2: After starting the engine, brake warning lamp is turned off.

Component Function Check

INFOID:0000000005517386

1.

BRAKE WARNING LAMP OPERATION CHECK 1

Check that the lamp illuminates for approximately 2 seconds after the ignition switch is turned ON.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Proceed to diagnosis procedure. Refer to 

BRC-83, "Diagnosis Procedure"

.

2.

BRAKE WARNING LAMP OPERATION CHECK 2

Check that the brake warning lamp in the combination meter turns ON/OFF correctly when operating the park-
ing brake pedal.
NOTE:
Brake warning lamp will turn on in case of parking brake operation (when switch is ON) or of brake fluid level
switch operation (when brake fluid is insufficient).

Is the inspection result normal?

YES

>> INSPECTION END

NO

>> Check parking brake switch. Refer to 

BRC-78, "Diagnosis Procedure"

.

Diagnosis Procedure

INFOID:0000000005517387

1.

CHECK PARKING BRAKE SWITCH

Check that the brake warning lamp in the combination meter turns ON/OFF correctly when operating the park-
ing brake pedal.
NOTE:
Brake warning lamp will turn on in case of parking brake operation (when switch is ON) or of brake fluid level
switch operation (when brake fluid is insufficient).

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Check parking brake switch. Refer to 

BRC-78, "Diagnosis Procedure"

.

2.

CHECK SELF-DIAGNOSIS

Perform self-diagnosis for “ABS” with CONSULT-III.

Is the inspection result normal?

YES

>> Check combination meter. Refer to 

MWI-34, "CONSULT-III Function (METER/M&A)"

.

NO

>> Check items displayed by self-diagnosis for “ABS” with CONSULT-III.

Special Repair Requirement

INFOID:0000000005532355

1.

ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION AND CALIBRATION OF DECEL G

SENSOR

Condition

Brake warning lamp (Note 1)

Ignition switch OFF

–

For 2 seconds after turning ignition switch ON

×

 (Note 2)

2 seconds later after turning ignition switch ON

×

 (Note 2)

EBD function is malfunctioning.

×

BRC-84

< DTC/CIRCUIT DIAGNOSIS >

[VDC/TCS/ABS]

BRAKE WARNING LAMP

After removing/replacing an ABS actuator and electric unit (control unit), be sure to perform the following pro-
cedure.
• Adjustment of steering angle sensor neutral position: Refer to 

BRC-9, "ADJUSTMENT OF STEERING

ANGLE SENSOR NEUTRAL POSITION : Description"

.

• Calibration of decel G sensor: Refer to 

BRC-10, "CALIBRATION OF DECEL G SENSOR : Description"

.

>> END

VDC OFF INDICATOR LAMP

BRC-85

< DTC/CIRCUIT DIAGNOSIS >

[VDC/TCS/ABS]

C

D

E

G

H

I

J

K

L

M

A

B

BRC

N

O

P

VDC OFF INDICATOR LAMP

Description

INFOID:0000000005517389

×

: ON –: OFF

Component Function Check

INFOID:0000000005517390

1.

VDC OFF INDICATOR LAMP OPERATION CHECK 1

Check that the lamp illuminates for approximately 2 seconds after the ignition switch is turned ON.
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Proceed to diagnosis procedure. Refer to 

BRC-85, "Diagnosis Procedure"

.

2.

VDC OFF INDICATOR LAMP OPERATION CHECK 2

Check that the VDC OFF indicator lamp in the combination meter turns ON/OFF correctly when operating the
VDC OFF switch.
Is the inspection result normal?

YES

>> INSPECTION END

NO

>> Check VDC OFF switch. Refer to 

BRC-80, "Diagnosis Procedure"

.

Diagnosis Procedure

INFOID:0000000005517391

1.

CHECK VDC OFF SWITCH

Check that the VDC OFF indicator lamp in the combination meter turns ON/OFF correctly when operating the
VDC OFF switch.
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Check VDC OFF switch. Refer to 

BRC-80, "Diagnosis Procedure"

.

2.

CHECK SELF-DIAGNOSIS

Perform self-diagnosis for “ABS” with CONSULT-III.
Is the inspection result normal?

YES

>> Check combination meter. Refer to 

MWI-34, "CONSULT-III Function (METER/M&A)"

.

NO

>> Check items displayed by self-diagnosis for “ABS” with CONSULT-III.

Condition

VDC OFF indicator lamp

Ignition switch OFF

–

For 2 seconds after turning ignition switch ON

×

2 seconds later after turning ignition switch ON

–

VDC OFF switch turned ON. (VDC function is OFF.)

×

VDC/TCS function is malfunctioning.

×

ABS function is malfunctioning.

×

EBD function is malfunctioning.

×

BRC-86

< DTC/CIRCUIT DIAGNOSIS >

[VDC/TCS/ABS]

SLIP INDICATOR LAMP

SLIP INDICATOR LAMP

Description

INFOID:0000000005517393

×

: ON 

: Blink –: OFF

Component Function Check

INFOID:0000000005517394

1.

CHECK SLIP INDICATOR LAMP OPERATION

Check that the lamp illuminates for approximately 2 seconds after the ignition switch is turned ON.

Is the inspection result normal?

YES

>> INSPECTION END

NO

>> Proceed to diagnosis procedure. Refer to 

BRC-86, "Diagnosis Procedure"

.

Diagnosis Procedure

INFOID:0000000005517395

1.

CHECK SELF-DIAGNOSIS

Perform self-diagnosis for “ABS” with CONSULT-III.
Is the inspection result normal?

YES

>> Check combination meter. Refer to 

MWI-34, "CONSULT-III Function (METER/M&A)"

.

NO

>> Check items displayed by self-diagnosis for “ABS” with CONSULT-III.

Condition

SLIP indicator lamp

Ignition switch OFF

–

For 2 seconds after turning ignition switch ON

×

2 seconds later after turning ignition switch ON

–

VDC/TCS is activated while driving.

VDC/TCS function is malfunctioning.

×

ABS function is malfunctioning.

×

EBD function is malfunctioning.

×