Nissan Murano Z51. Manual - part 259

BCS

INSPECTION AND ADJUSTMENT

BCS-3

< BASIC INSPECTION >

C

D

E

F

G

H

I

J

K

L

B

A

O

P

N

BASIC INSPECTION

INSPECTION AND ADJUSTMENT

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (BCM)

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (BCM) : Description

INFOID:0000000005518260

BEFORE REPLACEMENT

When replacing BCM, save or print current vehicle specification with CONSULT-III configuration before
replacement.
NOTE:
If “READ CONFIGURATION” can not be used, use the “WRITE CONFIGURATION - Manual selection” after
replacing BCM.

AFTER REPLACEMENT

CAUTION:

• When replacing BCM, you must perform “WRITE CONFIGURATION” with CONSULT-III.
- Complete the procedure of “WRITE CONFIGURATION” in order.
- If you set incorrect “WRITE CONFIGURATION”, incidents might occur.
- Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
• When replacing BCM, perform the system initialization (NATS).

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (BCM) : Special Repair 
Requirement

INFOID:0000000005518261

1.

SAVING VEHICLE SPECIFICATION

CONSULT-III Configuration

Perform “READ CONFIGURATION” to save or print current vehicle specification. Refer to 

BCS-3, "CONFIGU-

RATION (BCM) : Description"

.

NOTE:
If “READ CONFIGURATION” can not be used, use the “WRITE CONFIGURATION - Manual selection” after
replacing BCM.

>> GO TO 2.

2.

REPLACE BCM

Replace BCM. Refer to 

BCS-95, "Exploded View"

.

>> GO TO 3.

3.

WRITING VEHICLE SPECIFICATION

CONSULT-III Configuration

Perform “WRITE CONFIGURATION - Config file” or “WRITE CONFIGURATION - Manual selection” to write
vehicle specification. Refer to 

BCS-4, "CONFIGURATION (BCM) : Special Repair Requirement"

.

>> GO TO 4.

4.

INITIALIZE BCM (NATS)

Perform BCM initialization. (NATS)

>> WORK END

CONFIGURATION (BCM)

CONFIGURATION (BCM) : Description

INFOID:0000000005518262

Vehicle specification needs to be written with CONSULT-III because it is not written after replacing BCM.

BCS-4

< BASIC INSPECTION >

INSPECTION AND ADJUSTMENT

Configuration has three functions as follows

NOTE:

Manual setting item: Items which need selection by vehicle specifications

Automatic setting item: Items which are written in automatically (Setting can not be changed)

CAUTION:

• When replacing BCM, you must perform “WRITE CONFIGURATION” with CONSULT-III.
• Complete the procedure of “WRITE CONFIGURATION” in order.
• If you set incorrect “WRITE CONFIGURATION”, incidents might occur.
• Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
• Never perform “WRITE CONFIGURATION” except for new BCM. 

CONFIGURATION (BCM) : Special Repair Requirement

INFOID:0000000005518263

1.

WRITING MODE SELECTION

CONSULT-III Configuration

Select “CONFIGURATION” of BCM.

When writing saved data>>GO TO 2.
When writing manually>>GO TO 3.

2.

PERFORM “WRITE CONFIGURATION - CONFIG FILE”

CONSULT-III Configuration

Perform “WRITE CONFIGURATION - Config file”.

>> WORK END

3.

PERFORM “WRITE CONFIGURATION - MANUAL SELECTION”

CONSULT-III Configuration

1.

Select “WRITE CONFIGURATION - Manual selection”.

2.

Identify the correct model and configuration list. Refer to 

BCS-5, "CONFIGURATION (BCM) : Configura-

tion list"

.

3.

Confirm and/or change setting value for each item.

CAUTION:

Thoroughly read and understand the vehicle specification. Incorrect settings may result in abnor-
mal control of ECU.

4.

Select “SETTING”.

CAUTION:

Make sure to select “SETTING” even if the indicated configuration of brand new BCM is same as
the desirable configuration. If not, configuration which is set automatically by selecting vehicle
model can not be memorized.

5.

When “COMMAND FINISHED”, select “END”.

>> GO TO 4.

4.

OPERATION CHECK

Confirm that each function controlled by BCM operates normally.

>> WORK END

Function

Description

READ CONFIGURATION

• Reads the vehicle configuration of current BCM.
• Saves the read vehicle configuration.

WRITE CONFIGURATION - Manual selection

Writes the vehicle configuration with manual selection.

WRITE CONFIGURATION - Config file

Writes the vehicle configuration with saved data.

BCS

INSPECTION AND ADJUSTMENT

BCS-5

< BASIC INSPECTION >

C

D

E

F

G

H

I

J

K

L

B

A

O

P

N

CONFIGURATION (BCM) : Configuration list

INFOID:0000000005518264

CAUTION:

Thoroughly read and understand the vehicle specification. Incorrect settings may result in abnormal
control of ECU.

EXCEPT FOR MEXICO

⇔

: Items which confirm vehicle specifications

FOR MEXICO

MANUAL SETTING ITEM

NOTE

Items

Setting value

AUTO LIGHT

WITH 

⇔

 WITHOUT

—

DTRL

WITH 

⇔

 WITHOUT

• WITH: With daytime running light system
• WITHOUT: Without daytime running light system

AV C/U

WITH 

⇔

 WITHOUT

—

AUTO BACK DOOR

WITH 

⇔

 WITHOUT

—

THEFT ALM AREA

WITHOUT 

⇔

 MODE2

• WITHOUT: Without vehicle security system
• MODE2: With vehicle security system

I-KEY

WITH

—

RAIN SENSOR

WITH 

⇔

 WITHOUT

—

Key Fob Type

MODE7 

⇔

 MODE9

• MODE7: With automatic back door system
• MODE9: Without automatic back door system

AUTO SETTING ITEM

NOTE

Items

Setting value

H/L BULB

DEFAULT

—

FR FOG LAMP

WITH

—

RR FOG LAMP

WITH

Even on a vehicle without rear fog lamp. It displays “WITH”.

TRANSMISSION

AT with ABS

—

TPMS WITH

—

TIRE PRESSURE

230kPa

—

TR OPEN SW (INT)

MODE1

—

FOG LAMP BULB

SINGLE BULB

—

DI LMP VARIAT

MODE2

—

LIGHT RECOG

MODE4

RR WIPER GND

MODE1

—

HAZARD SW TYPE

MODE1

—

BCM AC CONTROL

MODE1

—

Trunk/Glass Hatch select

Glass Hatch

Even on a vehicle without glass hatch. It displays “Glass 
Hatch”.

WELCOME LIGHT SELECT

WITHOUT

—

WELCOME LIGHT TIMER

MODE1

—

REAR WIPER

WITH

—

TRUNK ACT OUTPUT

MODE2

—

RAIN SEN TYPE

MODE2

—

DROP WIP FUNCTION

WITHOUT

—

WELCOME LIGHT TIMER2

MODE1

—

BCS-6

< BASIC INSPECTION >

INSPECTION AND ADJUSTMENT

⇔

: Items which confirm vehicle specifications

MANUAL SETTING ITEM

NOTE

Items

Setting value

AUTO LIGHT

WITH 

⇔

 WITHOUT

—

DTRL

WITHOUT

—

AV C/U

WITH 

⇔

 WITHOUT

—

AUTO BACK DOOR

WITHOUT

—

THEFT ALM AREA

MODE2

—

HAZARD SW TYPE

MODE1

—

I-KEY

WITH

—

RAIN SENSOR

WITH 

⇔

 WITHOUT

—

Key Fob Type

MODE9

—

AUTO SETTING ITEM

NOTE

Items

Setting value

H/L BULB

DEFAULT

—

FR FOG LAMP

WITH

—

RR FOG LAMP

WITH

Even on a vehicle without rear fog lamp. It displays “WITH”.

TRANSMISSION

AT with ABS

—

TPMS WITHOUT

—

TR OPEN SW (INT)

MODE1

—

FOG LAMP BULB

SINGLE BULB

—

DI LMP VARIAT

MODE2

—

LIGHT RECOG

MODE4

RR WIPER GND

MODE1

—

BCM AC CONTROL

MODE1

—

Trunk/Glass Hatch select

Glass Hatch

Even on a vehicle without glass hatch. It displays “Glass 
Hatch”.

WELCOME LIGHT SELECT

WITHOUT

—

WELCOME LIGHT TIMER

MODE1

—

REAR WIPER

WITH

—

TRUNK ACT OUTPUT

MODE2

—

RAIN SEN TYPE

MODE2

—

DROP WIP FUNCTION

WITHOUT

—

WELCOME LIGHT TIMER2

MODE1

—