Nissan Murano Z51. Manual - part 202

AV

DIAGNOSIS SYSTEM (AV CONTROL UNIT)

AV-587

< SYSTEM DESCRIPTION >

[BOSE AUDIO WITH NAVIGATION]

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

DIAGNOSIS SYSTEM (AV CONTROL UNIT)

Diagnosis Description

INFOID:0000000005528695

MULTIFUNCTION SWITCH AND PRESET SWITCH SELF-DIAGNOSIS FUNCTION

The ON/OFF operation (continuity) of each switch in the multifunction switch and preset switch can be
checked.

Self-diagnosis Mode

• Press the “BACK” switch and the “

” switch of the 8-direction

switches within 10 seconds after turning the ignition switch from
OFF to ACC and hold them for 3 seconds or more. Then the
buzzer sounds, all indicators of the preset switch illuminate, and
the self-diagnosis mode starts.

• The continuity of each switch at the ON position can be checked

by pressing the switch. The buzzer sounds if the switch is normal.
NOTE:
The disk eject switch cannot be checked.

Finishing Self-diagnosis Mode

Self-diagnosis mode is canceled when turning the ignition switch OFF.

MULTI AV SYSTEM ON BOARD DIAGNOSIS FUNCTION

• The AV control unit diagnosis function starts up with multifunction switch operation and the AV control unit

performs a diagnosis for each unit in the system during the on board diagnosis.

• Perform a CONSULT-III diagnosis if the on board diagnosis does not start, e.g., the screen does not display

anything, the multifunction switch does not function, etc.

ON BOARD DIAGNOSIS

Description

• The trouble diagnosis function has a self-diagnosis mode for conducting trouble diagnosis automatically and

a confirmation/adjustment mode for operating manually.

• The self-diagnosis mode performs diagnoses on the AV control unit, connections between system compo-

nents as well as connections between AV control unit and GPS antenna and between AV control unit and
satellite radio antenna. Then it displays the diagnosis results on the display.

• The confirmation/adjustment mode allows the technician to check, modify or adjust the vehicle signals and

set values, as well as to monitor the system error records and system communication status. The checking,
modifying or adjusting generally require human intervention and judgment (the system cannot automati-
cally). 

On Board Diagnosis Item

JSNIA1074GB

Mode

Description

Self-Diagnosis

• AV control unit diagnosis 
• Diagnoses the connections across system components, between AV 

control unit and GPS antenna and between AV control unit and satel-
lite radio antenna.

AV-588

< SYSTEM DESCRIPTION >

[BOSE AUDIO WITH NAVIGATION]

DIAGNOSIS SYSTEM (AV CONTROL UNIT)

NOTE:

*: On-board self-diagnosis is not supported. Only CONSULT-III is supported.

STARTING PROCEDURE

1.

Start the engine.

2.

Turn the audio system OFF.

3.

While pressing the “SETTING” button, turn the volume control
dial clockwise or counterclockwise for 40 clicks or more. (When
the self-diagnosis mode is started, a short beep will be heard.)
• Shifting from current screen to previous screen is performed

by pressing the “BACK” button.

Confirmation/

Adjustment

Display Diagnosis

The following check functions are available: color tone check by color 
bar display, light and shade check by gray scale display and touch panel 
calibration response check.

Vehicle Signals

Diagnosis of signals can be performed for vehicle speed, parking brake, 
lights, ignition switch, and reverse.

Speaker Test

The connection of a speaker can be confirmed by test tone.

Climate Control

*

Not used.

Navigation

Steering Angle Ad-
justment

When there is a difference between the actual turning angle and the ve-
hicle mark turning angle, it can be adjusted.

Speed Calibration

When there is a difference between the current location mark and the ac-
tual location, it can be adjusted.

XM SAT Subscrip-
tion Status

The XM NavTraffic subscription status can be checked. 

Error History

The system malfunction and the frequency when occurring in the past 
are displayed. When the malfunctioning item is selected, the time and 
place that the selected malfunction last occurred are displayed.

Vehicle CAN Diagnosis

The transmitting/receiving of CAN communication can be monitored.

AV COMM Diagnosis

The communication condition of each unit of MULTI AV system can be 
monitored.

Handsfree Phone

The received volume adjustment of hands-free phone, microphone 
speaker check, and erase memory can be performed.

Camera Cont.

The signal connected to camera control unit can be checked and the 
guiding line position that overlaps rear view camera image can be adjust-
ed.

Bluetooth

The passkey and the device name can be checked and changed.

SAT

Change Channel

Any necessary channels required to receive traffic information from the 
satellite radio system can be set.

Change Application 
ID

Any application ID'-s required to receive traffic information from the sat-
ellite radio system can be set.

Diag

Not used.

Delete Unit Connection Log

Erase the connection history of unit and error history.

Initialize Settings

Initializes the AV control unit memory.

Mode

Description

JSNIA1075GB

AV

DIAGNOSIS SYSTEM (AV CONTROL UNIT)

AV-589

< SYSTEM DESCRIPTION >

[BOSE AUDIO WITH NAVIGATION]

C

D

E

F

G

H

I

J

K

L

M

B

A

O

P

4.

The trouble diagnosis initial screen is displayed, and then the
items of “Self Diagnosis” and “Confirmation/Adjustment” can be
selected.

SELF-DIAGNOSIS MODE

1.

Start the self-diagnosis function and select “Self Diagnosis”.

-

Self-diagnosis subdivision screen is displayed, and the self-
diagnosis mode starts.

-

The bar graph visible on the center of the self-diagnosis subdivi-
sion screen indicates progress of the trouble diagnosis.

2.

Diagnosis results are displayed after the self-diagnosis is com-
pleted. The unit names and the connection lines are color-coded
according to the diagnostic results.

NOTE:

• Only the control unit (AV control unit) is displayed in red.

• The number of units that is displayed on the on board self-diagnosis display

according to equipment.

• Replace AV control unit if “Self-Diagnosis did not run because of a control

unit malfunction” is indicated. The symptom is AV control unit internal error.
Refer to 

AV-787, "Exploded View"

.

-

If multiple errors occur at the same time for a single unit, the
screen switch colors are determined according to the following
order of priority: red > gray.

JSNIA0061GB

JSNIA0062GB

Diagnosis results

Unit

Con-

nection 

line

Normal

Green

Green

Connection malfunction

Gray

Yellow

Unit malfunction 

Note

Red

Green

JSNIA0593GB

AV-590

< SYSTEM DESCRIPTION >

[BOSE AUDIO WITH NAVIGATION]

DIAGNOSIS SYSTEM (AV CONTROL UNIT)

-

The comments of the self-diagnosis results can be viewed with a
component in the diagnosis result screen.

SELF-DIAGNOSIS RESULTS

• The self-diagnosis mode allows the technician to diagnose the connection in the communication line

between AV control unit and each unit and the internal operation of the AV control unit.

• Because the start condition of diagnosis function is a switch operation, the on board diagnosis function can-

not be started up if any malfunction is detected in the communication circuit between AV control unit and
multifunction switch.

• Check the applicable display at the following table, and then repair the malfunctioning parts.

Self-diagnosis Result Chart

JSNIA0064GB

Diagnosis results

Detection logic

Possible malfunction location / Action 

to take

NOTE:
When a control unit malfunction is detected (red in unit 
display), connection malfunctions with other connec-
tion unit may be displayed.

Malfunction is detected in AV control 
unit power supply and ground circuits.

Check AV control unit power supply 
and ground circuits. When detecting 
no malfunction in those components, 
replace AV control unit.

“Self-Diagnosis did not run because of a control unit 
malfunction”

JSNIA0594GB