Nissan Murano Z51. Manual - part 1293

PRECAUTIONS

SEC-219

< PRECAUTION >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

SEC

N

O

P

FOR MEXICO : Precaution for Procedure without Cowl Top Cover

INFOID:0000000005716233

When performing the procedure after removing cowl top cover, cover
the lower end of windshield with urethane, etc.

FOR MEXICO : Precaution Necessary for Steering Wheel Rotation after Battery Dis-
connect

INFOID:0000000005716230

NOTE:
• Before removing and installing any control units, first turn the push-button ignition switch to the LOCK posi-

tion, then disconnect both battery cables.

• After finishing work, confirm that all control unit connectors are connected properly, then re-connect both

battery cables.

• Always use CONSULT-III to perform self-diagnosis as a part of each function inspection after finishing work.

If a DTC is detected, perform trouble diagnosis according to self-diagnosis results.

For vehicle with steering lock unit, if the battery is disconnected or discharged, the steering wheel will lock and
cannot be turned.
If turning the steering wheel is required with the battery disconnected or discharged, follow the operation pro-
cedure below before starting the repair operation.

OPERATION PROCEDURE

1.

Connect both battery cables.
NOTE:
Supply power using jumper cables if battery is discharged.

2.

Turn the push-button ignition switch to ACC position.
(At this time, the steering lock will be released.)

3.

Disconnect both battery cables. The steering lock will remain released with both battery cables discon-
nected and the steering wheel can be turned.

4.

Perform the necessary repair operation.

5.

When the repair work is completed, re-connect both battery cables. With the brake pedal released, turn
the push-button ignition switch from ACC position to ON position, then to LOCK position. (The steering
wheel will lock when the push-button ignition switch is turned to LOCK position.)

6.

Perform self-diagnosis check of all control units using CONSULT-III.

PIIB3706J

SEC-220

< REMOVAL AND INSTALLATION >

[WITH INTELLIGENT KEY SYSTEM]

KEY SLOT

REMOVAL AND INSTALLATION

KEY SLOT

Exploded View

INFOID:0000000005515657

Removal and Installation

INFOID:0000000005515658

REMOVAL

1.

Remove the instrument lower panel LH (2). Refer to 

IP-13,

"Removal and Installation"

.

2.

Disconnect key slot connector.

3.

Remove the key slot mounting screw (A), and then remove key
slot (1) from instrument lower panel LH (2).

INSTALLATION

Install in the reverse order of removal.

1.

Key slot

2.

Instrument lower panel LH

JMKIA1820ZZ

JMKIA1821ZZ

PUSH BUTTON IGNITION SWITCH

SEC-221

< REMOVAL AND INSTALLATION >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

SEC

N

O

P

PUSH BUTTON IGNITION SWITCH

Exploded View

INFOID:0000000005515659

Removal and Installation

INFOID:0000000005515660

REMOVAL

1.

Remove the instrument stay cover LH. Refer to 

IP-13, "Removal and Installation"

.

2.

Remove the push-button ignition switch (1) from instrument stay
cover LH, after removing pawl (A). Press push-button ignition
switch (1) back to disengage from instrument stay cover LH (2).

INSTALLATION

Install in the reverse order of removal.

1.

Push-button ignition switch

JMKIA1812ZZ

JMKIA1813ZZ

SEC-222

< REMOVAL AND INSTALLATION >

[WITH INTELLIGENT KEY SYSTEM]

SECURITY INDICATOR LAMP

SECURITY INDICATOR LAMP

Exploded View

INFOID:0000000005515661

Removal and Installation

INFOID:0000000005515662

REMOVAL

Remove the security indicator lamp (1).

•

Disengage pawls with tool (A) and pull up the security indica-
tor lamp.

INSTALLATION

Install in the reverse order of removal.

1.

Security indicator lamp

JMKIA1830ZZ

: Pawl

JMKIA1831ZZ