|
|
содержание .. 1208 1209 1210 1211 ..
SE-28 < DTC/CIRCUIT DIAGNOSIS > PRIMARY POSITION LIMIT SWITCH Is the inspection result normal? YES >> GO TO 5. NO >> Replace primary position limit switch (RH) [reclining device assembly (RH)]. Refer to . 5. CHECK INTERMITTENT INCIDENT GI-39, "Intermittent Incident" >> INSPECTION END RH : Component Inspection INFOID:0000000005518170 COMPONENT INSPECTION 1. CHECK PRIMARY POSITION LIMIT SWITCH (RH) 1. Turn ignition switch OFF. 2. Disconnect primary position limit switch (RH) connector. 3. Check primary position limit switch (RH) terminals. Is the inspection result normal? YES >> Primary position limit switch (RH) is OK. NO >> Replace primary position limit switch (RH) [reclining device assembly (RH)]. Refer to . Primary position limit switch (RH) connector Terminal Condition Continuity B495 1 2 Primary position limit switch (RH) is pressed Existed Primary position limit switch (RH) is released Not existed |