Nissan Murano Z51. Manual - part 52

ADP-200

< SYMPTOM DIAGNOSIS >

MANUAL FUNCTION OR MEMORY FUNCTION DOES NOT OPERATE

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-39, "Intermittent Incident"

.

NO

>> GO TO 1.

SEAT LIFTING (REAR)

SEAT LIFTING (REAR) : Diagnosis Procedure

INFOID:0000000005515433

1.

CHECK LIFTING (REAR) MECHANISM

Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunction parts.

2.

CHECK LIFTING SWITCH (REAR)

Check lifting switch (rear).
Refer to 

ADP-60, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunction parts.

3.

CHECK LIFTING MOTOR (REAR)

Check lifting motor (rear).
Refer to 

ADP-105, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunction parts.

4.

CHECK LIFTING SENSOR (REAR)

Check lifting sensor (rear).
Refer to 

ADP-87, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunction parts.

5.

CONFIRM THE OPERATION

Check the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-39, "Intermittent Incident"

.

NO

>> GO TO 1.

STEERING TILT

STEERING TILT : Diagnosis Procedure

INFOID:0000000005515434

1.

CHECK STEERING TILT MECHANISM

Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunction parts.

2.

CHECK TILT SWITCH

Check tilt switch.
Refer to 

ADP-62, "Component Function Check"

.

MANUAL FUNCTION OR MEMORY FUNCTION DOES NOT OPERATE

ADP-201

< SYMPTOM DIAGNOSIS >

C

D

E

F

G

H

I

K

L

M

A

B

ADP

N

O

P

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunction parts.

3.

CHECK TILT MOTOR

Check tilt motor.
Refer to 

ADP-107, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunction parts.

4.

CHECK TILT SENSOR

Check steering tilt sensor.
Refer to 

ADP-90, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunction parts.

5.

CONFIRM THE OPERATION

Check the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-39, "Intermittent Incident"

.

NO

>> GO TO 1.

STEERING TELESCOPIC

STEERING TELESCOPIC : Diagnosis Procedure

INFOID:0000000005515435

1.

CHECK STEERING TELESCOPIC MECHANISM

Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunction parts.

2.

CHECK TELESCOPIC SWITCH

Check telescopic switch.
Refer to 

ADP-64, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunction parts.

3.

CHECK TELESCOPIC MOTOR

Check telescopic motor.
Refer to 

ADP-109, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunction parts.

4.

CHECK TELESCOPIC SENSOR

Check steering telescopic sensor.
Refer to 

ADP-92, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunction parts.

5.

CONFIRM THE OPERATION

ADP-202

< SYMPTOM DIAGNOSIS >

MANUAL FUNCTION OR MEMORY FUNCTION DOES NOT OPERATE

Check the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-39, "Intermittent Incident"

.

NO

>> GO TO 1.

DOOR MIRROR

DOOR MIRROR : Diagnosis Procedure

INFOID:0000000005515436

1.

CHECK DOOR MIRROR MECHANISM

Check for the following.
• Mechanism deformation or pinched foreign materials.
• Interference with other parts because of poor installation.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunction parts.

2.

CHECK MIRROR SWITCH

Check mirror switch.
Refer to 

ADP-71, "MIRROR SWITCH : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunction parts.

3.

CHECK MIRROR MOTOR

Check mirror motor.
Refer to 

ADP-111, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunction parts.

4.

CHECK MIRROR SENSOR

Check mirror sensor.
Refer to 

ADP-95, "DRIVER SIDE : Component Function Check"

. (Driver side)

Refer to 

ADP-96, "PASSENGER SIDE : Component Function Check"

. (Passenger side)

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunction parts.

5.

CONFIRM THE OPERATION

Check the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-39, "Intermittent Incident"

.

NO

>> GO TO 1.

ENTRY/EXIT ASSIST FUNCTION DOES NOT OPERATE

ADP-203

< SYMPTOM DIAGNOSIS >

C

D

E

F

G

H

I

K

L

M

A

B

ADP

N

O

P

ENTRY/EXIT ASSIST FUNCTION DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000005515437

1.

CHECK SYSTEM SETTING

1.

Check system setting.
Refer to 

ADP-11, "SYSTEM SETTING : Special Repair Requirement"

.

2.

Check the operation.

Is the inspection result normal?

YES

>> Entry/Exit function is OK.

NO

>> GO TO 2.

2.

PERFORM SYSTEM INITIALIZATION

1.

Perform system initialization.
Refer to 

ADP-9, "SYSTEM INITIALIZATION : Special Repair Requirement"

.

2.

Check the operation.

Is the inspection result normal?

YES

>> Entry/Exit function is OK.

NO

>> GO TO 3.

3.

CHECK FRONT DOOR SWITCH (DRIVER SIDE)

Check front door switch (driver side).
Refer to 

DLK-97, "WITH AUTOMATIC BACK DOOR : Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunction parts.

4.

CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-39, "Intermittent Incident"

.

NO

>> GO TO 1.