|
|
WW-44 < REMOVAL AND INSTALLATION > FRONT WIPER DRIVE ASSEMBLY 4. Disconnect the front wiper motor connector. 5. Remove front wiper drive assembly from the vehicle. INSTALLATION 1. Install the front wiper drive assembly to the vehicle. 2. Connect the front wiper motor connector. 3. Operate the front wiper to move it to the auto stop position. 4. Install the cowl top cover. Refer to EXT-20, "Removal and Installation" 5. Install front wiper arms. Refer to WW-39, "Removal and Installation" . Disassembly and Assembly INFOID:0000000008463057 DISASSEMBLY 1. Remove the front wiper linkage 1 and 2 from the front wiper drive assembly. CAUTION: Never bend the linkage or damage the plastic part of the ball joint when removing the front wiper 2. Remove the front wiper motor mounting screws, and then remove the front wiper motor from the front ASSEMBLY 1. Connect the front wiper motor connector. 2. Operate the front wiper to move it to the auto stop position. 3. Disconnect the front wiper motor connector. 4. Install front wiper motor to front wiper frame. 5. Install the front wiper linkage 2 to the front wiper motor and the front wiper frame. 6. Install the front wiper linkage 1 to the front wiper frame. CAUTION: • Never drop front wiper motor or cause it to come into contact with other parts. (retainer). Apply multi − purpose grease or an equivalent if necessary. Revision: 2012 October 2013 Murano CrossCabriolet |