|
|
DTC P0453 EVAP CONTROL SYSTEM PRESSURE SENSOR EC-437 C D E F G H I J K L M A EC Revision: 2006 July 2007 Murano DTC Confirmation Procedure NBS0035B NOTE: ° C (41 ° F) or more. WITH CONSULT-II 1. Start engine and warm it up to normal operating temperature. 2. Turn ignition switch OFF and wait at least 10 seconds. 3. Turn ignition switch ON. 4. Select “DATA MONITOR” mode with CONSULT-II. 5. Make sure that “FUEL T/TMP SE” is more than 0 ° C (32 ° F). 6. Start engine and wait at least 10 seconds. 7. If 1st trip DTC is detected, go to EC-439, "Diagnostic Procedure" . WITH GST 1. Start engine and warm it up to normal operating temperature. 2. Check that voltage between ECM terminal 107 (Fuel tank tem- 3. Turn ignition switch OFF and wait at least 10 seconds. 4. Start engine and wait at least 10 seconds. 5. Select Service $07 with GST. EC-439, "Diagnostic Procedure" . SEF194Y PBIB1110E |