Nissan Murano Z50 (2006 year). Manual - part 68

If NG, re-check TCM pin terminals for damage or loose connection with harness connector.

OK or NG

>> Replace the transaxle assembly. Refer to

>> Repair or replace damaged parts.

CVT-194

TROUBLE DIAGNOSIS FOR SYMPTOMS

Revision: 2006 August

2006 Murano

Vehicle Does Not Creep Backward in “R” Position

NCS00190

SYMPTOM:

Vehicle does not creep backward when selecting “R” position.

DIAGNOSTIC PROCEDURE

CHECK SELF-DIAGNOSTIC RESULTS

Perform self-diagnosis check. Refer to

Is any malfunction detected by self-diagnosis

YES

>> Check the malfunctioning system. Refer to

>> GO TO 2.

CHECK CONTROL CABLE

Check control cable. Refer to

OK or NG

>> GO TO 3.

>> Adjust control cable. Refer to

CHECK CVT FLUID LEVEL

Check CVT fluid level. Refer to

OK or NG

>> GO TO 4.

>> Refill CVT fluid.

CHECK LINE PRESSURE

Check line pressure at idle. Refer to

OK or NG

>> GO TO 5.

>> Check the malfunctioning item. Refer to

SCIA2001E

SAT638A

SAT494G

TROUBLE DIAGNOSIS FOR SYMPTOMS

CVT-195

CVT

Revision: 2006 August

2006 Murano

CHECK SYMPTOM

Check again. Refer to

CVT-48, "Check at Idle"

OK or NG

>> INSPECTION END

>> GO TO 6.

CHECK TCM

Check TCM input/output signals. Refer to

If NG, re-check TCM pin terminals for damage or loose connection with harness connector.

OK or NG

>> Replace the transaxle assembly. Refer to

>> Repair or replace damaged parts.

CVT-196

TROUBLE DIAGNOSIS FOR SYMPTOMS

Revision: 2006 August

2006 Murano

Vehicle Does Not Creep Forward in “D”, “S” or “L” Position

NCS00191

SYMPTOM:

Vehicle does not creep forward when selecting “D”, “S”*, or “L”* position.
*: Without manual mode

DIAGNOSTIC PROCEDURE

CHECK SELF-DIAGNOSTIC RESULTS

Perform self-diagnosis check. Refer to

Is any malfunction detected by self-diagnosis?

YES

>> Check the malfunctioning system. Refer to

>> GO TO 2.

CHECK CONTROL CABLE

Check control cable. Refer to

OK or NG

>> GO TO 3.

>> Adjust control cable. Refer to

CHECK CVT FLUID LEVEL

Check CVT fluid level. Refer to

OK or NG

>> GO TO 4.

>> Refill CVT fluid.

CHECK LINE PRESSURE

Check line pressure at idle. Refer to

OK or NG

>> GO TO 5.

>> Check the malfunctioning item. Refer to

SCIA2001E

SAT638A

SAT494G

TROUBLE DIAGNOSIS FOR SYMPTOMS

CVT-197

CVT

Revision: 2006 August

2006 Murano

CHECK SYMPTOM

Check again. Refer to

CVT-48, "Check at Idle"

OK or NG

>> INSPECTION END

>> GO TO 6.

CHECK TCM

Check TCM input/output signals. Refer to

If NG, re-check TCM pin terminals for damage or loose connection with harness connector.

OK or NG

>> Replace the transaxle assembly. Refer to

>> Repair or replace damaged parts.

CVT-198

TROUBLE DIAGNOSIS FOR SYMPTOMS

Revision: 2006 August

2006 Murano

CVT Does Not Shift

NCS00192

SYMPTOM:

CVT does not shift at the specified speed on “Cruise Test”.

DIAGNOSTIC PROCEDURE

CHECK SELF-DIAGNOSTIC RESULTS

Perform self-diagnosis check. Refer to

Is any malfunction detected by self-diagnosis?

YES

>> Check the malfunctioning system. Refer to

>> GO TO 2.

CHECK CONTROL CABLE

Check control cable. Refer to

OK or NG

>> GO TO 3.

>> Adjust control cable. Refer to

CHECK CVT FLUID LEVEL

Check CVT fluid level. Refer to

OK or NG

>> GO TO 4.

>> Refill CVT fluid.

CHECK LINE PRESSURE

Check line pressure at idle. Refer to

OK or NG

>> GO TO 5.

>> Check the malfunctioning item. Refer to

SCIA2001E

SAT638A

SAT494G

TROUBLE DIAGNOSIS FOR SYMPTOMS

CVT-199

CVT

Revision: 2006 August

2006 Murano

CHECK SYMPTOM

Check again. Refer to

OK or NG

>> INSPECTION END

>> GO TO 6.

CHECK TCM

Check TCM input/output signals. Refer to

If NG, re-check TCM pin terminals for damage or loose connection with harness connector.

OK or NG

>> Replace the transaxle assembly. Refer to

>> Repair or replace damaged parts.

CVT-200

TROUBLE DIAGNOSIS FOR SYMPTOMS

Revision: 2006 August

2006 Murano

Cannot Be Changed to Manual Mode

NCS00193

SYMPTOM:

Does not change to manual mode when manual shift gate is used.

DIAGNOSTIC PROCEDURE

CHECK SELF-DIAGNOSTIC RESULTS

Perform self-diagnosis check. Refer to

Is any malfunction detected by self-diagnosis?

YES

>> Check the malfunctioning system. Refer to

CVT-132, "DTC P0826 MANUAL MODE SWITCH CIRCUIT"

>> GO TO 2.

CHECK MANUAL MODE SWITCH

Check the manual mode switch circuit. Refer to

OK or NG

>> GO TO 3.

>> Repair or replace damaged parts.

SYMPTOM CHECK

Check again. Refer to

OK or NG

>> INSPECTION END

>> GO TO 4.

CHECK TCM

Check TCM input/output signals. Refer to

If NG, re-check TCM pin terminals for damage or loose connection with harness connector.

OK or NG

>> INSPECTION END

>> Repair or replace damaged parts.

TROUBLE DIAGNOSIS FOR SYMPTOMS

CVT-201

CVT

Revision: 2006 August

2006 Murano

CVT Does Not Shift in Manual Mode

NCS00194

SYMPTOM:

Speed does not change even if the selector lever is put in the manual shift gate position and the selec-
tor lever is operated to + side or to - side.

DIAGNOSTIC PROCEDURE

CHECK SELF-DIAGNOSTIC RESULTS

Perform self-diagnosis check. Refer to

Is any malfunction detected by self-diagnosis?

YES

>> Check the malfunctioning system. Refer to

CVT-132, "DTC P0826 MANUAL MODE SWITCH CIRCUIT"

>> GO TO 2.

CHECK MANUAL MODE SWITCH

Check the manual mode switch circuit. Refer to

OK or NG

>> GO TO 3.

>> Repair or replace damaged parts.

CHECK CONTROL CABLE

Check control cable. Refer to

OK or NG

>> GO TO 4.

>> Adjust control cable. Refer to

CHECK CVT FLUID LEVEL

Check CVT fluid level. Refer to

OK or NG

>> GO TO 5.

>> Refill CVT fluid.

SCIA2001E

SAT638A

CVT-202

TROUBLE DIAGNOSIS FOR SYMPTOMS

Revision: 2006 August

2006 Murano

CHECK LINE PRESSURE

Check line pressure at idle. Refer to

OK or NG

>> GO TO 6.

>> Check the malfunctioning item. Refer to

CHECK SYMPTOM

Check again. Refer to

OK or NG

>> INSPECTION END

>> GO TO 7.

CHECK TCM

Check TCM input/output signals. Refer to

If NG, re-check TCM pin terminals for damage or loose connection with harness connector.

OK or NG

>> Replace the transaxle assembly. Refer to

>> Repair or replace damaged parts.

SAT494G

TROUBLE DIAGNOSIS FOR SYMPTOMS

CVT-203

CVT

Revision: 2006 August

2006 Murano

Cannot Be Changed to Second Position (WITHOUT MANUAL MODE)

NCS00195

SYMPTOM:

Does not change to second position when selecting “S” position.

DIAGNOSTIC PROCEDURE

CHECK SELF-DIAGNOSTIC RESULTS

Perform self-diagnosis check. Refer to

Is any malfunction detected by self-diagnosis?

YES

>> Check the malfunctioning system. Refer to

CVT-178, "SECOND POSITION SWITCH"

>> GO TO 2.

CHECK SECOND POSITION SWITCH

Check the second position switch circuit. Refer to

OK or NG

>> GO TO 3.

>> Repair or replace damaged parts.

CHECK SYMPTOM

Check again. Refer to

OK or NG

>> INSPECTION END

>> GO TO 4.

CHECK TCM

Check TCM input/output signals. Refer to

If NG, re-check TCM pin terminals for damage or loose connection with harness connector.

OK or NG

>> INSPECTION END

>> Repair or replace damaged parts.

CVT-204

TROUBLE DIAGNOSIS FOR SYMPTOMS

Revision: 2006 August

2006 Murano

Cannot Be Changed to “L” Position (WITHOUT MANUAL MODE)

NCS00196

SYMPTOM:

Does not change to “L” position when selecting “L” position.

DIAGNOSTIC PROCEDURE

CHECK SELF-DIAGNOSTIC RESULTS

Perform self-diagnosis check. Refer to

Is any malfunction detected by self-diagnosis?

YES

>> Check the malfunctioning system. Refer to

>> GO TO 2.

CHECK CONTROL CABLE

Check control cable. Refer to

OK or NG

>> GO TO 3.

>> Adjust control cable. Refer to

CHECK CVT FLUID LEVEL

Check CVT fluid level. Refer to

OK or NG

>> GO TO 4.

>> Refill CVT fluid.

CHECK LINE PRESSURE

Check line pressure at idle. Refer to

OK or NG

>> GO TO 5.

>> Check the malfunctioning item. Refer to

SCIA2001E

SAT638A

SAT494G

TROUBLE DIAGNOSIS FOR SYMPTOMS

CVT-205

CVT

Revision: 2006 August

2006 Murano

CHECK SYMPTOM

Check again. Refer to

OK or NG

>> INSPECTION END

>> GO TO 6.

CHECK TCM

Check TCM input/output signals. Refer to

If NG, re-check TCM pin terminals for damage or loose connection with harness connector.

OK or NG

>> Replace the transaxle assembly. Refer to

>> Repair or replace damaged parts.

CVT-206

TROUBLE DIAGNOSIS FOR SYMPTOMS

Revision: 2006 August

2006 Murano

Vehicle Does Not Decelerate by Engine Brake

NCS00197

SYMPTOM:

No engine brake is applied when the gear is shifted from the “M2” to “M1” position.
No engine brake is applied when the gear is shifted from the “S”* to “L” position.
*: Without manual mode

DIAGNOSTIC PROCEDURE

CHECK SELF-DIAGNOSTIC RESULTS

Perform self-diagnosis check. Refer to

Is any malfunction detected by self-diagnosis?

YES

>> Check the malfunctioning system. Refer to

>> GO TO 2.

CHECK CONTROL CABLE

Check control cable. Refer to