|
|
EVAPORATIVE EMISSION SYSTEM EC-655 C D E F G H I J K L M A EC Revision: 2004 November 2004 Murano EVAP SERVICE PORT Positive pressure is delivered to the EVAP system through the EVAP Removal and Installation ABS004PD EVAP CANISTER Tighten EVAP canister as shown in the figure. EVAP CANISTER VENT CONTROL VALVE 1. Turn EVAP canister vent control valve counterclockwise. 2. Remove the EVAP canister vent control valve. Do not reuse the O-ring, replace it with a new one. How to Detect Fuel Vapor Leakage ABS004PE CAUTION: ● Never use compressed air or a high pressure pump. ● Do not exceed 4.12 kPa (0.042 kg/cm 2 , 0.6 psi) of pressure in EVAP system. NOTE: ● Do not start engine. ● Improper installation of EVAP service port adapter to the EVAP service port may cause a leak. SEF462UA PBIB1383E PBIB1384E |