|
|
DTC P2138 APP SENSOR EC-591 C D E F G H I J K L M A EC Revision: 2004 November 2004 Murano Specification data are reference values and are measured between each terminal and ground. CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in dam- Diagnostic Procedure ABS004O6 1. CHECK GROUND CONNECTIONS 1. Turn ignition switch OFF. 2. Loosen and retighten two ground screws on the body. OK or NG OK >> GO TO 2. NG >> Repair or replace ground connections. TER- MINAL NO. WIRE COLOR ITEM CONDITION DATA (DC Voltage) 47 G Sensor power supply [Ignition switch: ON] Approximately 5V 82 B Sensor ground [Engine is running] ● Warm-up condition ● Idle speed Approximately 0V 83 G Sensor ground [Engine is running] ● Warm-up condition ● Idle speed Approximately 0V 90 R/W Sensor power supply [Ignition switch: ON] Approximately 5V 91 P Sensor power supply [Ignition switch: ON] Approximately 5V 98 W/R Accelerator pedal position [Ignition switch: ON] ● Engine stopped ● Accelerator pedal fully released 0.25 - 0.50V [Ignition switch: ON] ● Engine stopped ● Accelerator pedal fully depressed 2.0 - 2.5V 106 W Accelerator pedal position [Ignition switch: ON] ● Engine stopped ● Accelerator pedal fully released 0.5 - 1.0V [Ignition switch: ON] ● Engine stopped ● Accelerator pedal fully depressed 4.2 - 4.8V PBIB1835E |