|
|
REFRIGERANT LINES ATC-155 C D E F G H I K L M A B ATC Revision; 2004 April 2003 Murano INSTALLATION 1. Install the field coil. ′ s pin with the hole in the compressor ′ s front head. 2. Install the compressor connector. 3. Install the pulley assembly using the installer and a hand press, 4. Using the holder to prevent clutch disc rotation, tighten the bolt 5. Check clearance around the entire periphery of clutch disc. If the specified clearance is not obtained, replace adjusting Break-in Operation When replacing compressor clutch assembly, always carry out the break-in operation. This is done by engag- RHA142E RJIA1884E RJIA1885E Disc to pulley : 0.3 - 0.60 mm (0.012 - 0.024 in) RJIA1886E |