|
|
содержание .. 409 410 411 412 ..
AUTOMATIC BACK DOOR CONTROL UNIT DLK-255 < ECU DIAGNOSIS INFORMATION > [WITH INTELLIGENT KEY SYSTEM] C D E F G H I J L M A B DLK N O P Fail Safe INFOID:0000000009719125 DTC Inspection Priority Chart INFOID:0000000009719126 If some DTCs are displayed at the same time, perform inspections one by one based on the following priority DTC Index INFOID:0000000009719127 NOTE: Details of time display • 1 - 39: Displayed if any previous malfunction is present when current condition is normal. It increases like 1 → 2 → 3...38 → 39 after returning to the normal condition whenever ignition switch OFF → ON. The counter remains at 39 even if the number of cycles exceeds it. It is counted from 1 again when turning ignition switch → ON after returning to the normal condition if the malfunction is detected again. Display contents of CONSULT Fail-safe Cancellation U1000: CAN COMM Intermittent clutch function Normal return B2401 IGN OPEN Intermittent clutch function All following condition are satisfied matic back door control unit: OFF • BCM receive ignition position sig- nal (OFF) via CAN B2403 PULSE ENCODER Inhibit automatic back door operation When receiving the pulse from en- B2409 HALF LATCH SW Intermittent clutch function Half latch switch is ON from OFF B2416 TOUCH SEN R OPEN During close operation: Intermittent clutch Normal return B2417 TOUCH SEN L OPEN During close operation: Intermittent clutch Normal return B2418 CLUTCH PWR SPLY Inhibit automatic back door operation Reception of next operation request B2419 OPEN SW Inhibit automatic back door operation Erase DTC, reconnect battery B2420 CLOSE SW Inhibit automatic back door operation Erase DTC, reconnect battery B2421 CLUTCH TIME OUT Intermittent clutch function Reception of next operation request B2422 BACK DOOR STATE Intermittent clutch function Detect back door fully closed posi- B2423 ABD MTR TIME OUT Intermittent clutch function Reception of next operation request B2424 CLSR CONDITION Inhibit automatic back door operation Normal return or reconnect battery Priority DTC 1 • U1000: CAN COMM CIRCUIT 2 • B2403 PULSE ENCODER |