Nissan Murano. Manual - part 1174

RF-80

< SYMPTOM DIAGNOSIS >

SUNSHADE SYSTEM DOES NOT OPERATE PROPERLY

SUNSHADE SYSTEM DOES NOT OPERATE PROPERLY

Diagnosis Procedure

INFOID:0000000009719675

1.

CHECK SUNSHADE MECHANISM

Check the following.
• Operation malfunction caused by sunshade mechanism deformation, pinched harness or other foreign

materials

• Operation malfunction and interference with other parts by poor installation
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK SUNSHADE MOTOR ASSEMBLY POWER SUPPLY AND GROUND CIRCUIT

Check sunshade motor assembly power supply and ground circuit.
Refer to 

RF-13, "SUNSHADE MOTOR ASSEMBLY : Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK COMMUNICATION CIRCUIT

Check communication circuit.
Refer to 

RF-15, "Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the harness.

4.

CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.

NO

>> GO TO 1.

AUTO OPERATION DOES NOT OPERATE

RF-81

< SYMPTOM DIAGNOSIS >

C

D

E

F

G

H

I

J

L

M

A

B

RF

N

O

P

AUTO OPERATION DOES NOT OPERATE

Description

INFOID:0000000009719676

Auto operation does not operate
• Auto operation of glass lid does not operate.
• Glass lid stops halfway.
• Anti-pinch function operates.

Diagnosis Procedure

INFOID:0000000009719677

1.

CHECK GLASS LID

Check the following items.
• Cracks, damage, or deformation of weather-strip.
• Sticking of weather-strip.
• Loose or missing glass lid mounting blot.
• Misalignment of glass lid.

Refer to 

RF-98, "Adjustment"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CHECK WIND DEFLECTOR

Check wind deflector for deformation and interference.
Refer to 

RF-122, "Removal and Installation"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK SUNROOF FRAME ASSEMBLY

Check the following items.
• Damage, deformation or trapped foreign material of slide rail.
• Insufficient application of grease to sliding section of slide rail.

Refer to 

RF-114, "Disassembly and Assembly"

.

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace the malfunctioning parts.

4.

PERFORM INITIALIZATION PROCEDURE

Initialization procedure is executed and operation is confirmed.
Refer to 

RF-4, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement"

.

Is the inspection result normal?

YES

>> Sunroof and sunshade system is normal.

NO

>> GO TO 5.

5.

CHECK SUNROOF SWITCH

Check sunroof switch.
Refer to 

RF-16, "Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Repair or replace the malfunctioning parts.

6.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.

NO

>> GO TO 1.

RF-82

< SYMPTOM DIAGNOSIS >

RETAINED POWER OPERATION DOES NOT OPERATE PROPERLY

RETAINED POWER OPERATION DOES NOT OPERATE PROPERLY

Diagnosis Procedure

INFOID:0000000009719678

1.

CHECK DOOR SWITCH

Check door switch. 
Refer to 

RF-18, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.

NO 

>> GO TO 1.

ANTI-PINCH FUNCTION DOES NOT OPERATE

RF-83

< SYMPTOM DIAGNOSIS >

C

D

E

F

G

H

I

J

L

M

A

B

RF

N

O

P

ANTI-PINCH FUNCTION DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000009719679

1.

CHECK SUNROOF AND SUNSHADE MECHANISM

Check the following.
• Operation malfunction caused by sunroof and sunshade mechanism deformation, pinched harness or other

foreign materials

• Operation malfunction and interference with other parts by poor installation
Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Repair or replace the malfunctioning parts.

2.

PERFORM INITIALIZATION

Perform initialization procedure.
Refer to 

RF-4, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement"

.

Is the inspection result normal?

YES

>> Sunroof and sunshade system is normal.

NO

>> GO TO 1.