Nissan X-Trail 32. Manual - part 470

ANTI-HIJACK FUNCTION DOES NOT OPERATE

DLK-221

< SYMPTOM DIAGNOSIS >

[TYPE 1]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

SYMPTOM DIAGNOSIS

ANTI-HIJACK FUNCTION DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000010735083

1.

CHECK “DOOR LOCK–UNLOCK SET” SETTING IN “WORK SUPPORT”

1.

Select “DOOR LOCK” of “BCM” using CONSULT.

2.

Select “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT” mode.

3.

Check “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT”
Refer to 

DLK-74, "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK) (With Intelligent Key System

and Super Lock)"

.

Is the inspection result normal?

YES

>> GO TO 2

NO

>> Set “DOOR LOCK-UNLOCK SET” in “WORK SUPPORT”.

2.

REPLACE BCM

1.

Replace BCM. Refer to 

BCS-121, "Removal and Installation"

.

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.

DLK-222

< SYMPTOM DIAGNOSIS >

[TYPE 1]

AUTO DOOR LOCK OPERATION DOES NOT OPERATE

AUTO DOOR LOCK OPERATION DOES NOT OPERATE

Diagnosis Procedure

INFOID:0000000010708203

1.

CHECK “AUTO LOCK SET” SETTING IN “WORK SUPPORT”

1.

Select “INTELLIGENT KEY” of “BCM” using CONSULT.

2.

Select “AUTO LOCK SET” in “WORK SUPPORT” mode.

3.

Check “AUTO LOCK SET” in “WORK SUPPORT”.
Refer to 

DLK-75, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY) (With Super

Lock)"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Set “MODE 2”, “MODE 3”, “MODE 4”, “MODE 5”, “MODE 6” or “MODE 7” in “AUTO LOCK SET”.

2.

REPLACE BCM

1.

Replace BCM. Refer to 

BCS-121, "Removal and Installation"

.

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.

AUTOMATIC BACK DOOR OPERATION DOES NOT OPERATE

DLK-223

< SYMPTOM DIAGNOSIS >

[TYPE 1]

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

AUTOMATIC BACK DOOR OPERATION DOES NOT OPERATE

ALL SWITCHES

ALL SWITCHES : Description

INFOID:0000000010708186

Automatic back door open/close function does not operate using all switches.

ALL SWITCHES : Diagnosis Procedure

INFOID:0000000010708187

1.

CHECK DTC WITH AUTOMATIC BACK DOOR CONTROL UNIT

Check that DTC is not detected with automatic back door control unit.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Refer to 

DLK-88, "DTC Index"

.

2.

CHECK POWER SUPPLY AND GROUND CIRCUIT

Check automatic back door control unit power supply and ground circuit.
Refer to 

DLK-205, "AUTOMATIC BACK DOOR CONTROL UNIT : Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

CHECK BACK DOOR AUTO CLOSURE FUNCTION

Check back door auto closure function.
Does back door auto closure function operate with back door opener switch?

YES

>> GO TO 4.

NO

>> Refer to 

DLK-230, "OPEN/CLOSURE FUNCTION : Diagnosis Procedure"

.

4.

CHECK AUTOMATIC BACK DOOR MAIN SWITCH

Check automatic back door main switch.
Refer to 

DLK-161, "Component Function Check"

. 

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Repair or replace the malfunctioning parts.

5.

CHECK TOUCH SENSOR

Check touch sensor.
Refer to 

DLK-208, "LH : Component Function Check"

 (LH) and 

DLK-207, "RH :

Component Function Check"

 (RH).

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Repair or replace the malfunctioning parts.

6.

CHECK SPINDLE MOTOR

Check spindle motor.
Refer to 

DLK-212, "LH : Diagnosis Procedure"

 (LH) and 

DLK-211, "RH : Diagnosis Procedure"

 (RH).

Is the inspection result normal?

YES

>> GO TO 7.

NO

>> Repair or replace the malfunctioning parts.

7.

REPLACE AUTOMATIC BACK DOOR CONTROL UNIT

1.

Replace automatic back door control unit. Refer to 

DLK-327, "Removal and Installation"

.

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.

DLK-224

< SYMPTOM DIAGNOSIS >

[TYPE 1]

AUTOMATIC BACK DOOR OPERATION DOES NOT OPERATE

AUTOMATIC BACK DOOR SWITCH

AUTOMATIC BACK DOOR SWITCH : Description

INFOID:0000000010708188

Automatic back door open/close function does not operate using automatic back door switch.

AUTOMATIC BACK DOOR SWITCH : Diagnosis Procedure

INFOID:0000000010708189

1.

CHECK AUTO CLOSE FUNCTION

Check auto close function using automatic back door close switch or Intelligent Key button operation.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Refer to 

DLK-223, "ALL SWITCHES : Diagnosis Procedure"

.

2.

CHECK AUTOMATIC BACK DOOR SWITCH

Check automatic back door switch.
Refer to 

DLK-159, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

REPLACE AUTOMATIC BACK DOOR CONTROL UNIT

1.

Replace automatic back door control unit. Refer to 

DLK-327, "Removal and Installation"

.

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.

AUTOMATIC BACK DOOR CLOSE SWITCH

AUTOMATIC BACK DOOR CLOSE SWITCH : Description

INFOID:0000000010708190

Automatic back door open/close function does not operate using automatic back door close switch.

AUTOMATIC BACK DOOR CLOSE SWITCH : Diagnosis Procedure

INFOID:0000000010708191

1.

CHECK AUTO OPEN/CLOSE FUNCTION

Check auto open/close function using automatic back door switch.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Refer to 

DLK-223, "ALL SWITCHES : Diagnosis Procedure"

.

2.

CHECK AUTOMATIC BACK DOOR CLOSE SWITCH

Check automatic back door close switch.
Refer to 

DLK-157, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace the malfunctioning parts.

3.

REPLACE AUTOMATIC BACK DOOR CONTROL UNIT

1.

Replace automatic back door control unit. Refer to 

DLK-327, "Removal and Installation"

.

2.

Confirm the operation after replacement.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.

INTELLIGENT KEY