Nissan X-Trail 32. Manual - part 2142

TM-526

< ECU DIAGNOSIS INFORMATION >

[CVT: RE0F10G]

TCM

P188E

• Restart the engine during the stop/start system operation
• Turn OFF the electric oil pump relay
• When the vehicle is in stop/start system operation and 

the engine stops, restart the engine immediately

—

P188F

• Restart the engine during the stop/start system operation
• Turn OFF the electric oil pump relay
• When the vehicle is in stop/start system operation and 

the engine stops, restart the engine immediately

—

P1890

• Restart the engine during the stop/start system operation
• Turn OFF the electric oil pump relay
• When the vehicle is in stop/start system operation and 

the engine stops, restart the engine immediately

—

P2765

• Start  is  slow
• Acceleration is slow
• Lock-up is not performed
• Manual mode is not activated
• Stop/start system prohibited
• Restart the engine during the stop/start system operation
• Turn OFF the electric oil pump relay

—

P2813

• Selector shock is large
• Start  is  slow
• Acceleration is slow
• Vehicle speed is not increased
• Stop/start system prohibited
• Restart the engine during the stop/start system operation
• Turn OFF the electric oil pump relay

When a malfunction occurs on the low oil pressure side

• Selector shock is large
• Stop/start system prohibited
• Restart the engine during the stop/start system operation
• Turn OFF the electric oil pump relay

When a malfunction occurs on the high oil pressure side

P2814

• Selector shock is large
• Stop/start system prohibited
• Restart the engine during the stop/start system operation
• Turn OFF the electric oil pump relay

—

P2815

• Selector shock is large
• Stop/start system prohibited
• Restart the engine during the stop/start system operation
• Turn OFF the electric oil pump relay

—

U0073

• Selector shock is large
• Start  is  slow
• Acceleration is slow
• Lock-up is not performed
• Stop/start system prohibited
• Restart the engine during the stop/start system operation
• Turn OFF the electric oil pump relay

—

U0100

• Selector shock is large
• Start  is  slow
• Acceleration is slow
• Lock-up is not performed
• Stop/start system prohibited
• Restart the engine during the stop/start system operation
• Turn OFF the electric oil pump relay

—

U0140

• Stop/start system prohibited
• Restart the engine during the stop/start system operation
• Turn OFF the electric oil pump relay

—

U0141

• Stop/start system prohibited
• Restart the engine during the stop/start system operation
• Turn OFF the electric oil pump relay

—

DTC

Vehicle behavior

Conditions of vehicle

TCM

TM-527

< ECU DIAGNOSIS INFORMATION >

[CVT: RE0F10G]

C

E

F

G

H

I

J

K

L

M

A

B

TM

N

O

P

Protection Control 

INFOID:0000000010622753

The TCM becomes the protection control status temporarily to protect the safety when the safety of TCM and
transmission is lost. It automatically returns to the normal status if the safety is secured.
The TCM has the following protection control.

CONTROL FOR WHEEL SPIN

TORQUE IS REDUCED WHEN DRIVING WITH THE REVERSE GEAR

CONTROL WHEN FLUID TEMPERATURE IS HIGH

REVERSE PROHIBIT CONTROL

U0155

• Stop/start system prohibited
• Restart the engine during the stop/start system operation
• Turn OFF the electric oil pump relay

—

U0300

• Selector shock is large
• Start  is  slow
• Acceleration is slow
• Lock-up is not performed

—

U1000

• Selector shock is large
• Start  is  slow
• Acceleration is slow
• Lock-up is not performed
• Stop/start system prohibited
• Restart the engine during the stop/start system operation
• Turn OFF the electric oil pump relay

—

U110F

• Stop/start system prohibited
• Restart the engine during the stop/start system operation
• Turn OFF the electric oil pump relay

—

U1111

• Stop/start system prohibited
• Restart the engine during the stop/start system operation
• Turn OFF the electric oil pump relay

—

U1117

• Stop/start system prohibited
• Restart the engine during the stop/start system operation
• Turn OFF the electric oil pump relay

—

DTC

Vehicle behavior

Conditions of vehicle

Control

When a wheel spin is detected, the engine output and gear ratio are limited and the line pressure is increased.
Limits engine output when a wheel spin occurs in any of right and left drive wheels.

Vehicle behavior in 
control 

If the accelerator is kept depressing during wheel spin, the engine revolution and vehicle speed are limited to 
a certain degree. 

Normal return condi-
tion

Wheel spin convergence returns the control to the normal control.

Control

Engine output is controlled according to a vehicle speed while reversing the vehicle.

Vehicle behavior in 
control 

Power performance may be lowered while reversing the vehicle.

Normal return condi-
tion

Torque returns to normal by positioning the selector lever in a range other than “R” position.

Control

When the CVT fluid temperature is high, the gear shift permission maximum revolution and the maximum 
torque are reduced than usual to prevent increase of the oil temperature. 

Vehicle behavior in 
control 

Power performance may be lowered, compared to normal control.

Normal return condi-
tion

The control returns to the normal control when CVT fluid temperature is lowered.

TM-528

< ECU DIAGNOSIS INFORMATION >

[CVT: RE0F10G]

TCM

DTC Inspection Priority Chart

INFOID:0000000010622754

If multiple malfunction codes are detected at the same time, check each code according to the DTC check pri-
ority list below. 

Control

The reverse brake is controlled to avoid becoming engaged when the selector lever is set in “R” position while 
driving in forward direction at more than the specified speed.

Vehicle behavior in 
control 

If the selector lever is put at “R” position when driving with the forward gear, the gear becomes neutral, not 
reverse. 

Normal return condi-
tion

The control returns to normal control when the vehicle is driven at low speeds. (The reverse brake becomes 
engaged.)

Priority

DTC

Items

(CONSULT screen terms)

Reference

1

P0863

CONTROL UNIT (CAN)

TM-613, "DTC Description"

U0073

COMM BUS A OFF

TM-555, "DTC Description"

U0100

LOST COMM (ECM A)

TM-556, "DTC Description"

U0140

LOST COMM (BCM)

TM-558, "DTC Description"

U0141

LOST COMM (BCM A)

TM-559, "DTC Description"

U0155

LOST COMM (IPC)

TM-560, "DTC Description"

U0300

CAN COMM DATA 

TM-561, "DTC Description"

U1000

CAN COMM CIRCUIT

TM-563, "DTC Description"

U110F

LOST COMM (ECM)

TM-564, "DTC Description"

U1111

LOST COMM (CHASSIS CONT MDUL)

TM-565, "DTC Description"

U1117

LOST COMM (ABS)

TM-566, "DTC Description"

2

P0740

TORQUE CONVERTER

TM-586, "DTC Description"

P0743

TORQUE CONVERTER

TM-588, "DTC Description"

P0778

PC SOLENOID B

TM-596, "DTC Description"

P0779

PC SOLENOID B

TM-598, "DTC Description"

P0962

PC SOLENOID A

TM-616, "DTC Description"

P0963

PC SOLENOID A

TM-618, "DTC Description"

P0966

PC SOLENOID B

TM-622, "DTC Description"

P0967

PC SOLENOID B

TM-624, "DTC Description"

P2814

SELECT SOLENOID

TM-648, "DTC Description"

P2815

SELECT SOLENOID

TM-650, "DTC Description"

TCM

TM-529

< ECU DIAGNOSIS INFORMATION >

[CVT: RE0F10G]

C

E

F

G

H

I

J

K

L

M

A

B

TM

N

O

P

DTC Index

INFOID:0000000010622755

NOTE:
• If multiple malfunction codes are detected at the same time, check each code according to the “DTC check

priority list”. Refer to 

TM-528, "DTC Inspection Priority Chart"

.

• The ignition counter is displayed in “FFD”. Refer to 

TM-510, "CONSULT Function"

.

3

P062F

EEPROM

TM-567, "DTC Description"

P0705

T/M RANGE SENSOR A

TM-568, "DTC Description"

P0706

T/M RANGE SENSOR A

TM-573, "DTC Description"

P0712

FLUID TEMP SENSOR A

TM-576, "DTC Description"

P0713

FLUID TEMP SENSOR A

TM-578, "DTC Description"

P0715

INPUT SPEED SENSOR A

TM-580, "DTC Description"

P0717

INPUT SPEED SENSOR A

TM-583, "DTC Description"

P0826

UP/DOWN SHIFT SWITCH

TM-600, "DTC Description"

P0841

FLUID PRESS SEN/SW A

TM-603, "DTC Description"

P0847

FLUID PRESS SEN/SW B

TM-605, "DTC Description"

P0848

FLUID PRESS SEN/SW B

TM-607, "DTC Description"

P084C

FLUID PRESS SEN/SW H

TM-609, "DTC Description"

P084D

FLUID PRESS SEN/SW H

TM-611, "DTC Description"

P0890

TCM

TM-614, "DTC Description"

P1586

G SENSOR

TM-626, "DTC Description"

P188E

ELECTRIC OIL PUMP

TM-632, "DTC Description"

P1890

ELECTRIC OIL PUMP RELAY

TM-639, "DTC Description"

P2765

INPUT SPEED SENSOR B

TM-643, "DTC Description"

4

P0744

TORQUE CONVERTER

TM-590, "DTC Description"

P0746

PC SOLENOID A

TM-592, "DTC Description"

P0776

PC SOLENOID B

TM-594, "DTC Description"

P0965

PC SOLENOID B

TM-620, "DTC Description"

P1588

G SENSOR

TM-629, "DTC Description"

P188F

ELECTRIC OIL PUMP

TM-637, "DTC Description"

P2813

SELECT SOLENOID

TM-646, "DTC Description"

Priority

DTC

Items

(CONSULT screen terms)

Reference

DTC

*1, *2

Items

(CONSULT screen terms)

Trip

MIL

*3

Stop/start 

indicator 

lamp

Reference

GST

CONSULT

(TRANSMISSION)

P062F

P062F

EEPROM

1

ON

Blinking

TM-567

P0705

P0705

T/M RANGE SENSOR A

2

ON

Blinking

TM-568

P0706

P0706

T/M RANGE SENSOR A

2

ON

Blinking

TM-573

P0712

P0712

FLUID TEMP SENSOR A

2

ON

Blinking

TM-576

P0713

P0713

FLUID TEMP SENSOR A

2

ON

Blinking

TM-578

P0715

P0715

INPUT SPEED SENSOR A

2

ON

Blinking

TM-580

P0717

P0717

INPUT SPEED SENSOR A

2

ON

Blinking

TM-583

P0740

P0740

TORQUE CONVERTER

2

ON

Blinking

TM-586

P0743

P0743

TORQUE CONVERTER

2

ON

Blinking

TM-588

P0744

P0744

TORQUE CONVERTER

2

ON

—

TM-590