|
|
содержание .. 2095 2096 2097 2098 ..
TM-346 < DTC/CIRCUIT DIAGNOSIS > [CVT: RE0F10D] P0746 PRESSURE CONTROL SOLENOID A P0746 PRESSURE CONTROL SOLENOID A DTC Description INFOID:0000000010622532 DTC DETECTION LOGIC NOTE: → ON → driv- ing → OFF". POSSIBLE CAUSE • Line pressure solenoid valve FAIL-SAFE • Selector shock is large DTC CONFIRMATION PROCEDURE CAUTION: Be careful of the driving speed. 1. PREPARATION BEFORE WORK If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn ignition switch OFF and wait for at >> GO TO 2. 2. CHECK DTC DETECTION 1. Start the engine. 2. Drive the vehicle. 3. Maintain the following conditions for 10 seconds or more. 4. Stop the vehicle. 5. Check the first trip DTC. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0746 PC SOLENOID A The detecting condition A or detection condition B is detected twice or - Acceleration/deceleration speed: − 0.49 m/s 2 ( − 0.05 G) or more - The primary pulley speed experienced 300 rpm or more and the sec- ondary pulley speed experienced 250 rpm or more at least once. - Secondary pulley speed: More than 150 rpm ley ratio exceeding 2.981 is 0.2 sec. or more continuously. • Detection condition B ley ratio exceeding 3.781 is 0.1 sec. or more continuously. Selector lever : “D” position Accelerator pedal position : 0.5/8 or more Vehicle speed : 40 km/h (25 MPH) or more |