Nissan X-Trail 32. Manual - part 1634

PB-62

< BASIC INSPECTION >

OPERATION OF REAR BRAKE CALIPER

• Never operate the parking brake switch.
• Never depress the brake pedal.

2.

Touch “START”.

>> GO TO 3.

3.

PERFORM THE SELF-DIAGNOSIS

With CONSULT

1.

Pull parking brake switch to activate electric parking brake.

2.

Push parking brake switch to release electric parking brake.

3.

Perform “EHS/PKB” self-diagnosis.

Is malfunction detected?

YES

>> Check the DTC. Refer to 

PB-36, "DTC Index"

. GO TO 4.

NO

>> GO TO 4.

4.

CHECK DATA MONITOR

With CONSULT

Select “EHS/PKB”, “DATA MONITOR”, “BR FORCE EST (LH)” and “BR FORCE EST (RH)” according to this
order. Check that signals are within the specified value. Refer to 

PB-29, "Reference Value"

.

Is the check result normal?

YES

>> GO TO 5.

NO

>> GO TO 1.

5.

ERASE SELF-DIAGNOSIS MEMORY

With CONSULT

1.

Turn the ignition switch OFF to ON. 

CAUTION:

Be sure to wait for 10 seconds or more after turning the ignition switch OFF or ON.

2.

Erase self-diagnosis results memory of “EHS/PKB”.

Is the memory erased?

YES

>> INSPECTION END

NO

>> Check the items indicated by the self-diagnosis.

RELEASE OF REAR BRAKE CALIPER

PB-63

< BASIC INSPECTION >

C

D

E

G

H

I

J

K

L

M

A

B

PB

N

O

P

RELEASE OF REAR BRAKE CALIPER

Description

INFOID:0000000010722948

CAUTION:

When the following operations are performed, always use CONSULT, for performing “BRAKE
RELEASE” of “WORK SUPPORT”.

×

: Required

 —: not required

*: M/T models

Work Procedure

INFOID:0000000010722949

CAUTION:

When the following operations are performed, always use CONSULT. (It cannot be performed by any
means other than CONSULT.) 
• Removing/installing electric parking brake control module
• Replacing electric parking brake control module
• Removing/installing rear brake pad (When not pressing piston of rear brake caliper assembly)
• Removing/installing rear brake pad (When pressing piston of rear brake caliper assembly)
• Replacing rear brake pad
• Removing/installing rear brake caliper assembly
• Replacing rear brake caliper assembly
NOTE:
When the replaced rear brake pad, refer to 

PB-52, "Work Procedure"

.

1.

PERFORM BRAKE OPERATION

With CONSULT

1.

Select “EHS/PKB”, “WORK SUPPORT”, and “BRAKE OPERATION” according to this order.

CAUTION:

• Never operate the parking brake switch.
• Never depress the brake pedal.

2.

Touch “START”.

>> GO TO 2.

2.

PERFORM BRAKE RELEASE

With CONSULT

1.

Select “EHS/PKB”, “WORK SUPPORT”, and “BRAKE RELEASE” according to this order.

CAUTION:

Procedure

BRAKE RELEASE

Removing/installing electric parking brake control module

×

Replacing electric parking brake control module

×

Removing/installing rear brake pad (When not pressing piston of rear 
brake caliper assembly)

×

Removing/installing rear brake pad (When pressing piston of rear brake 
caliper assembly)

×

Replacing rear brake pad

×

Removing/installing rear brake caliper assembly

×

Replacing rear brake caliper assembly

×

Removing/installing parking brake switch

—

Replacing parking brake switch

—

Removing/installing clutch stroke sensor

*

—

Replacing clutch stroke sensor

*

—

Removing/installing clutch pedal

*

—

Replacing clutch pedal

*

—

PB-64

< BASIC INSPECTION >

RELEASE OF REAR BRAKE CALIPER

• Never operate the parking brake switch.
• Never depress the brake pedal.

2.

Touch “START”.

>> GO TO 3.

3.

PERFORM THE SELF-DIAGNOSIS

With CONSULT

1.

Pull parking brake switch to activate electric parking brake.

2.

Push parking brake switch to release electric parking brake.

3.

Perform “EHS/PKB” self-diagnosis.

Is malfunction detected?

YES

>> Check the DTC. Refer to 

PB-36, "DTC Index"

. GO TO 4.

NO

>> GO TO 4.

4.

CHECK DATA MONITOR

With CONSULT

Select “EHS/PKB”, “DATA MONITOR”, “BR FORCE EST (LH)”, and “BR FORCE EST (RH)” according to this
order. Check that signals are within the specified value. Refer to 

PB-29, "Reference Value"

.

Is the check result normal?

YES

>> GO TO 5.

NO

>> GO TO 1.

5.

ERASE SELF-DIAGNOSIS MEMORY

With CONSULT

1.

Turn the ignition switch OFF to ON. 

CAUTION:

Be sure to wait for 10 seconds or more after turning the ignition switch OFF or ON.

2.

Erase self-diagnosis results memory of “EHS/PKB”.

Is the memory erased?

YES

>> INSPECTION END

NO

>> Check the items indicated by the self-diagnosis.

CHANGE OF SYSTEM MODE

PB-65

< BASIC INSPECTION >

C

D

E

G

H

I

J

K

L

M

A

B

PB

N

O

P

CHANGE OF SYSTEM MODE

Description

INFOID:0000000010722950

CAUTION:

When the following operations are performed, always use CONSULT, for performing “SYSTEM MODE
CHANGE” of “WORK SUPPORT”.

×

: Required

 —: not required

*: M/T models

Work Procedure

INFOID:0000000010722951

CAUTION:

When performing the following operations, always use CONSULT. (It cannot be performed by any
means other than CONSULT.) 
• Replacing electric parking brake control module

1.

CONFIGURATION

Perform the configuration. Refer to 

PB-47, "Work Procedure"

.

>> GO TO 2.

2.

CALIBRATION OF G SENSOR

Perform the calibration of G sensor. Refer to 

PB-57, "Work Procedure"

.

M/T models>>GO TO 3.
CVT models>>GO TO 4.

3.

RESET OF CLUTCH PEDAL STROKE SENSOR (M/T MODELS)

Perform the reset of clutch stroke sensor. Refer to 

PB-59, "Work Procedure"

.

>> GO TO 4.

4.

ADJUSTMENT OF REAR BRAKE CALIPER INITIAL POSITION

Perform the adjustment of rear brake caliper initial position: Refer to 

PB-55, "Work Procedure"

.

>> GO TO 5.

5.

OPERATION OF REAR BRAKE CALIPER

Perform the operation of rear brake caliper: Refer to 

PB-61, "Work Procedure"

.

>> GO TO 6.

Procedure

SYSTEM MODE CHANGE

Removing/installing electric parking brake control module

—

Replacing electric parking brake control module

×

Removing/installing rear brake pad (When not pressing piston of rear 
brake caliper assembly)

—

Replacing rear brake caliper assembly

—

Removing/installing parking brake switch

—

Replacing parking brake switch

—

Removing/installing clutch stroke sensor

*

—

Replacing clutch stroke sensor

*

—

Removing/installing clutch pedal

*

—

Replacing clutch pedal

*

—