|
|
содержание .. 1171 1172 1173 1174 ..
HEADLAMP LEVELIZER CIRCUIT EXL-149 < DTC/CIRCUIT DIAGNOSIS > [LED HEADLAMP] C D E F G H I J K M A B EXL N O P HEADLAMP LEVELIZER CIRCUIT Component Function Check INFOID:0000000010788842 1. CHECK HEADLAMP LEVELIZER OPERATION With CONSULT 1. Turn ignition switch ON. 2. Turn lighting switch 2ND. 3. Select “OPTIC AXIS ACTIVE TEST” in “Active Test” mode of “IPDM E/R” using CONSULT. 4. With operating the test item, check light axis operation. Is the inspection result normal? YES >> Headlamp levelizer circuit is normal. NO >> Refer to EXL-149, "Diagnosis Procedure" . Diagnosis Procedure INFOID:0000000010788843 1. CHECK HEADLAMP AIMING MOTOR FUSE 1. Turn ignition switch OFF. 2. Check that the following fuses are not fusing. Is the inspection result normal? YES >> GO TO 2. NO >> Replace the blown fuse after repairing the affected circuit if a fuse is blown. 2. CHECK HEADLAMP AIMING MOTOR POWER SUPPLY 1. Disconnect headlamp aiming motor connector. 2. Turn ignition switch ON. 3. Check voltage between headlamp aiming motor harness connector and ground. Is the inspection result normal? YES >> GO TO 4. NO >> GO TO 3. 3. CHECK HEADLAMP AIMING MOTOR POWER SUPPLY CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect IPDM E/R connectors. 3. Check continuity between headlamp aiming motor harness connector and IPDM E/R connector. Test item Light axis operation OPTIC AXIS ACTIVE TEST Default Moves the light axis to the initial po- Lower Moves the light axis to the lowest Unit Location Fuse No. Capacity Headlamp aiming motor IPDM E/R #97 10 A + - Voltage Headlamp aiming motor Connector Terminal RH E144 1 Ground 9 – 16 V LH E143 |