|
|
содержание .. 95 96 97 98 ..
MULTI-REMOTE CONTROL SYSTEM BL-97 C D E F G H J K L M A B BL Remote Controller Battery Check EIS005HY 1. CHECK REMOTE CONTROLLER BATTERY Remove battery and measure voltage across battery positive and negative terminals, (+) and ( − ). NOTE: OK or NG OK >> GO TO 2 NG >> Replace battery. Refer to . 2. CHECK REMOTE CONTROLLER FUNCTION With CONSULT-II OK or NG OK >> Remote controller is OK. Further inspection is neces- sary. Refer to . NG >> Replace remote controller. The new ID of remote controller cannot be 1. Remote controller battery check 2. Key switch check 3. Door switch check 4. Smart entrance control unit power supply and ground circuit 5. Replace smart entrance control unit. — Door lock or unlock does not function. 1. If the power door lock system does not operate manually, 2. Remote controller battery check 3. Replace smart entrance control unit. — Hazard reminder does not activate properly 1. Remote controller battery check 2. Hazard reminder check 3. Replace smart entrance control unit. — Symptom Diagnoses/service procedure Reference page ( + ) - ( - ) : 2.5V – 3.0V SEL237W RKE LOCK Pushing remote controller lock button : ON RKE UNLOCK Pushing remote controller unlock button : OFF SIIA1643E |