|
|
PB-46 < BASIC INSPECTION > ADDITIONAL SERVICE WHEN REPLACING ELECTRIC PARKING BRAKE CON- TROL MODULE ADDITIONAL SERVICE WHEN REPLACING ELECTRIC PARKING BRAKE Work Procedure INFOID:0000000010833860 When replacing the electric parking brake control module be sure to perform the following procedure. 1. CONFIGURATION Perform the configuration. Refer to . >> GO TO 2. 2. CALIBRATION OF G SENSOR Perform the calibration of G sensor. Refer to . >> GO TO 3. 3. RESET OF CLUTCH PEDAL STROKE SENSOR Perform the reset of clutch stroke sensor. Refer to >> GO TO 4. 4. ADJUSTMENT OF REAR BRAKE CALIPER INITIAL POSITION Perform the adjustment of rear brake caliper initial position: Refer to >> GO TO 5. 5. OPERATION OF REAR BRAKE CALIPER Perform the operation of rear brake caliper: Refer to >> GO TO 6. 6. RELEASE OF REAR BRAKE CALIPER Perform the release of rear brake caliper: Refer to >> GO TO 7. 7. CHANGE OF SYSTEM MODE Perform the change of system mode: Refer to >> End of work. |