|
|
Content .. 1943 1944 1945 1946 ..
PCS-52 < BASIC INSPECTION > [IPDM E/R] ADDITIONAL SERVICE WHEN REPLACING IPDM E/R BASIC INSPECTION ADDITIONAL SERVICE WHEN REPLACING IPDM E/R Description INFOID:0000000010499180 After replaced IPDM E/R, it is necessary to perform control unit configuration and height sensor initialize (For BEFORE REPLACEMENT When replacing IPDM E/R, save or print current vehicle specification with CONSULT configuration before AFTER REPLACEMENT CAUTION: • When replacing IPDM E/R, always perform “Read/Write Configuration” or “Manual Configuration” with CONSULT. Or not doing so, IPDM E/R control function does not operate normally. • Never perform “Read / Write Configuration” or “Manual Configuration” except for new IPDM E/R or the control function may not operate normally. Work Procedure INFOID:0000000010499181 1. SAVING VEHICLE SPECIFICATION (IPDM E/R) CONSULT Configuration Perform “Before Replace ECU” of “Read / Write Configuration” to save or print current vehicle specification. . NOTE: >> GO TO 2. 2. REPLACE IPDM E/R Replace IPDM E/R. Refer to PCS-67, "Removal and Installation" >> GO TO 3. 3. WRITING VEHICLE SPECIFICATION (IPDM E/R) CONSULT Configuration Perform “After Replace ECU” of “Read/Write Configuration” or “Manual Configuration” to write vehicle specifi- >> GO TO 4. 4. CHECK HEADLAMP TYPE Check headlamp type. LED headlamp>>GO TO 5. 5. HEIGHT SENSOR INITIALIZE Perform height sensor initialize. Refer to . >> WORK END |