Content .. 1209 1210 1211 1212 ..
Nissan Qashqai J11. Manual - part 1211
SUPER LOCK ACTUATOR
DLK-113
< DTC/CIRCUIT DIAGNOSIS >
[TYPE 1]
C
D
E
F
G
H
I
J
L
M
A
B
DLK
N
O
P
Is the inspection result normal?
YES
>> Check for internal short of each door lock actuator.
NO
>> Replace BCM. Refer to
BCS-135, "Removal and Installation"
.
PASSENGER SIDE
PASSENGER SIDE : Component Function Check
INFOID:0000000010479721
1.
CHECK FUNCTION
1.
Select “DOOR LOCK” of “BCM” using CONSULT.
2.
Select “SUPER LOCK” in “ACTIVE TEST” mode.
3.
Touch “LOCK” or “UNLOCK” to check that it works normally.
Is the inspection result normal?
YES
>> Super lock actuator is OK.
NO
>> Refer to
DLK-113, "PASSENGER SIDE : Diagnosis Procedure"
.
PASSENGER SIDE : Diagnosis Procedure
INFOID:0000000010479722
1.
CHECK SUPER LOCK ACTUATOR SIGNAL
1.
Turn ignition switch OFF.
2.
Disconnect front door lock assembly (passenger side) connector.
3.
Check voltage between front door lock assembly (passenger side) harness connector and ground.
Is the inspection result normal?
YES
>> Replace front door lock assembly (passenger side).
NO
>> GO TO 2.
2.
CHECK SUPER LOCK ACTUATOR CIRCUIT
1.
Disconnect BCM and each door lock assembly.
2.
Check continuity between BCM harness connector and front door lock assembly (passenger side) har-
ness connector.
3.
Check continuity between BCM connector and ground.
(+)
(–)
Condition
Voltage
BCM
Connector
Terminal
M68
148
Ground
Super lock
Release
9 – 16 V
149
Set
(+)
(–)
Condition
Voltage
Front door lock assembly (passenger side)
Connector
Terminal
D2
1
Ground
Super lock
Set
9 – 16 V
2
Release
BCM
Front door lock assembly (passenger side)
Continuity
Connector
Terminal
Connector
Terminal
M68
139
D2
2
Existed
149
1
BCM
Ground
Continuity
Connector
Terminal
M68
139
Not existed
149