|
|
EXL-56 < DTC/CIRCUIT DIAGNOSIS > [XENON TYPE] PARKING LAMP CIRCUIT PARKING LAMP CIRCUIT Component Function Check INFOID:0000000012201642 1. CHECK TAIL LAMP OPERATION Check that the tail lamp is turned ON. YES >> GO TO 2. NO >> Check tail lamp circuit. Refer to EXL-60, "Component Function Check" 2. CHECK PARKING LAMP OPERATION With CONSULT 1. Turn ignition switch ON. 2. Select “EXTERNAL LAMPS” in “Active Test” mode of “IPDM E/R” using CONSULT. 3. With operating the test items, check that the parking lamp is turned ON. Without CONSULT 1. Start IPDM E/R auto active test. Refer to PCS-12, "Diagnosis Description" 2. Check that the parking lamp is turned ON. YES >> Parking lamp circuit is normal. NO >> Refer to . Diagnosis Procedure INFOID:0000000012201643 1. CHECK PARKING LAMP POWER SUPPLY With CONSULT 1. Turn ignition switch ON. 2. Select “EXTERNAL LAMPS” in “Active Test” mode of “IPDM E/R” using CONSULT. 3. With operating the test items, check voltage between IPDM E/R harness connector and ground. Is the inspection result normal? YES >> GO TO 2. NO >> Replace IPDM E/R. Refer to PCS-37, "Removal and Installation" 2. CHECK PARKING LAMP POWER SUPPLY CIRCUIT 1. Turn ignition switch OFF. 2. Disconnect IPDM E/R connector and parking lamp connector. 3. Check continuity between IPDM E/R harness connector and parking lamp harness connector. Is the inspection result normal? YES >> GO TO 3. TAIL : Parking lamp ON Off : Parking lamp OFF + - Test item Voltage IPDM E/R Connector Terminal E14 43 Ground EXTERNAL TAIL 9 – 16 V Off 0 – 1 V IPDM E/R Parking lamp Continuity Connector Terminal Connector Terminal RH E14 43 E44 1 Existed LH E28 |