|
|
DLK-108 < SYMPTOM DIAGNOSIS > [WITH INTELLIGENT KEY SYSTEM] KEY REMINDER FUNCTION DOES NOT OPERATE KEY REMINDER FUNCTION DOES NOT OPERATE Diagnosis Procedure INFOID:0000000012196687 1. CHECK DTC WITH BCM Check that DTC is not detected with BCM. YES >> GO TO 2. NO >> Refer to 2. CHECK “ANTI KEY LOCK IN FUNCTI” SETTING IN “WORK SUPPORT” 1. Select “INTELLIGENT KEY” of “BCM” using CONSULT. 2. Select “ANTI KEY LOCK IN FUNCTI” in “WORK SUPPORT” mode. 3. Check “ANTI KEY LOCK IN FUNCTI” in “WORK SUPPORT”. DLK-28, "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)" Is the inspection result normal? YES >> GO TO 3. NO >> Set “ANTI KEY LOCK IN FUNCTI” in “WORK SUPPORT”. 3. CHECK DOOR SWITCH Check door switch. DLK-77, "Component Function Check" . Is the inspection result normal? YES >> GO TO 4. NO >> Repair or replace the malfunctioning parts. 4. CHECK INSIDE KEY ANTENNA Check inside key antenna. • Instrument center: Refer to . • Luggage room: Refer to . Is the inspection result normal? YES >> GO TO 5. NO >> Repair or replace the malfunctioning parts. 5. CHECK UNLOCK SENSOR Check unlock sensor. DLK-88, "Component Function Check" . Is the inspection result normal? YES >> GO TO 6. NO >> Repair or replace the malfunctioning parts. 6. REPLACE BCM 1. Replace BCM. Refer to BCS-94, "Removal and Installation" . 2. Confirm the operation after replacement. YES >> INSPECTION END NO >> Check intermittent incident. Refer to GI-45, "Intermittent Incident" . |