Content .. 112 113 114 115 ..

Nissan Juke F15. Manual - part 114

ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)

BRC-47

< ECU DIAGNOSIS INFORMATION >

[WITH VDC]

BRC

DTC

Malfunction detected condition

Fail-safe condition

C1101

When an open circuit is detected in rear RH wheel sensor circuit.

The following functions are sus-
pended.
• VDC function
• TCS function
• ABS function
• EBD function (only when both 2

rear wheels are malfunctioning)

• Brake limited slip differential

(BLSD) function

C1102

When an open circuit is detected in rear LH wheel sensor circuit.

C1103

When an open circuit is detected in front RH wheel sensor circuit.

C1104

When an open circuit is detected in front LH wheel sensor circuit.

C1105

• When a short circuit is detected in rear RH wheel sensor circuit.
• When power supply voltage of rear RH wheel sensor is in following state.
- Rear RH wheel sensor power supply voltage: 7.5 V

≥ Rear RH wheel sensor pow-

er supply voltage

- Rear RH wheel sensor power supply voltage: 16 V

≤ Rear RH wheel sensor power

supply voltage

• When distance between rear RH wheel sensor and rear RH wheel sensor rotor is

large.

• When installation of rear RH wheel sensor or rear RH wheel sensor rotor is not

normal.

C1106

• When a short circuit is detected in rear LH wheel sensor circuit.
• When power supply voltage of rear LH wheel sensor is in following state.
- Rear LH wheel sensor power supply voltage: 7.5 V

≥ Rear LH wheel sensor power

supply voltage

- Rear LH wheel sensor power supply voltage: 16 V

≤ Rear LH wheel sensor power

supply voltage

• When distance between rear LH wheel sensor and rear LH wheel sensor rotor is

large.

• When installation of rear LH wheel sensor or rear LH wheel sensor rotor is not nor-

mal.

C1107

• When a short circuit is detected in front RH wheel sensor circuit.
• When power supply voltage of front RH wheel sensor is in following state.
- Front RH wheel sensor power supply voltage: 7.5 V

≥ Front RH wheel sensor

power supply voltage

- Front RH wheel sensor power supply voltage: 16 V

≤ Front RH wheel sensor pow-

er supply voltage

• When distance between front RH wheel sensor and front RH wheel sensor rotor

is large.

• When installation of front RH wheel sensor or front RH wheel sensor rotor is not

normal.

C1108

• When a short circuit is detected in front LH wheel sensor circuit.
• When power supply voltage of front LH wheel sensor is in following state.
- Front LH wheel sensor power supply voltage: 7.5 V

≥ Front LH wheel sensor pow-

er supply voltage

- Front LH wheel sensor power supply voltage: 16 V

≤ Front LH wheel sensor power

supply voltage

• When distance between front LH wheel sensor and front LH wheel sensor rotor is

large.

• When installation of front LH wheel sensor or front LH wheel sensor rotor is not

normal.

C1109

When ignition power supply voltage is in following state.
• Ignition power supply voltage: 10 V

≥ Ignition power supply voltage.

• Ignition power supply voltage: 16 V

≤ Ignition power supply voltage.

The following functions are sus-
pended.
• VDC function
• TCS function
• ABS function
• EBD function
• Brake limited slip differential

(BLSD) function

C1110

When there is an internal malfunction in the ABS actuator and electric unit (control
unit).

C1111

When a malfunction is detected in motor or motor relay.

The following functions are sus-
pended.
• VDC function
• TCS function
• ABS function
• Brake limited slip differential

(BLSD) function

BRC-48

< ECU DIAGNOSIS INFORMATION >

[WITH VDC]

ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)

C1113

When a malfunction is detected in decel G signal, or signal line of yaw rate/side/de-
cel G sensor is open or shorted.

The following functions are sus-
pended.
• VDC function
• TCS function
• ABS function (AWD)
• Brake limited slip differential

(BLSD) function

C1115

When difference in wheel speed between any wheel and others is detected the ve-
hicle is driven, because of installation of other tires than specified.

The following functions are sus-
pended.
• VDC function
• TCS function
• ABS function
• EBD function
• Brake limited slip differential

(BLSD) function

C1116

When stop lamp switch signal is not input when brake pedal operates.

The following functions are sus-
pended.
• VDC function
• TCS function
• Brake limited slip differential

(BLSD) function

C1120

When a malfunction is detected in front LH ABS IN valve.

The following functions are sus-
pended.
• VDC function
• TCS function
• ABS function
• EBD function
• Brake limited slip differential

(BLSD) function

C1121

When a malfunction is detected in front LH ABS OUT valve.

C1122

When a malfunction is detected in front RH ABS IN valve.

C1123

When a malfunction is detected in front RH ABS OUT valve.

C1124

When a malfunction is detected in rear LH ABS IN valve.

C1125

When a malfunction is detected in rear LH ABS OUT valve.

C1126

When a malfunction is detected in rear RH ABS IN valve.

C1127

When a malfunction is detected in rear RH ABS OUT valve.

C1130

When a malfunction is detected in ECM system.

The following functions are sus-
pended.
• VDC function
• TCS function
• Brake limited slip differential

(BLSD) function

C1140

When a malfunction is detected in actuator relay.

The following functions are sus-
pended.
• VDC function
• TCS function
• ABS function
• EBD function
• Brake limited slip differential

(BLSD) function

C1143

When a malfunction is detected in steering angle sensor.

The following functions are sus-
pended.
• VDC function
• TCS function
• ABS function (AWD)
• Brake limited slip differential

(BLSD) function

C1144

When neutral position adjustment of steering angle sensor is not complete.

The following functions are sus-
pended.
• VDC function
• TCS function
• Brake limited slip differential

(BLSD) function

DTC

Malfunction detected condition

Fail-safe condition

ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)

BRC-49

< ECU DIAGNOSIS INFORMATION >

[WITH VDC]

BRC

DTC Inspection Priority Chart

INFOID:0000000012199672

When multiple DTCs are displayed simultaneously, check one by one depending on the following priority list.

C1145

When a malfunction is detected in yaw rate signal, or signal line of yaw rate/side/
decel G sensor is open or shorted.

The following functions are sus-
pended.
• VDC function
• TCS function
• ABS function (AWD)
• Brake limited slip differential

(BLSD) function

C1146

When a malfunction is detected in side G signal, or signal line of yaw rate/side/decel
G sensor is open or shorted.

C1155

When brake fluid level low signal is detected.

The following functions are sus-
pended.
• VDC function
• TCS function
• Brake limited slip differential

(BLSD) function

C1164

When a malfunction is detected in cut valve 1.

The following functions are sus-
pended.
• VDC function
• TCS function
• ABS function
• EBD function
• Brake limited slip differential

(BLSD) function

C1165

When a malfunction is detected in cut valve 2.

C1166

When a malfunction is detected in suction valve 1.

C1167

When a malfunction is detected in suction valve 2.

C1170

When the information in ABS actuator and electric unit (control unit) is not the same.

The following functions are sus-
pended.
• VDC function
• TCS function
• ABS function
• Brake limited slip differential

(BLSD) function

C1176

When brake pedal position switch signal is not input when brake pedal operates.

The following functions are sus-
pended.
• VDC function
• TCS function
• Brake limited slip differential

(BLSD) function

U1000

When CAN communication signal is not continuously transmitted or received for 2
seconds or more.

The following functions are sus-
pended.
• VDC function
• TCS function
• Brake limited slip differential

(BLSD) function

U1010

When detecting error during the initial diagnosis of CAN controller of ABS actuator
and electric unit (control unit).

DTC

Malfunction detected condition

Fail-safe condition

Priority

Detected item (DTC)

• U1000 CAN COMM CIRCUIT
• U1010 CONTROL UNIT (CAN)

• C1110 CONTROLLER FAILURE
• C1170 VARIANT CODING

• C1130 ENGINE SIGNAL 1
• C1144 ST ANG SEN SIGNAL

• C1109 BATTERY VOLTAGE [ABNORMAL]
• C1111 PUMP MOTOR
• C1140 ACTUATOR RLY

BRC-50

< ECU DIAGNOSIS INFORMATION >

[WITH VDC]

ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)

DTC Index

INFOID:0000000012199673

• C1101 RR RH SENSOR-1
• C1102 RR LH SENSOR-1
• C1103 FR RH SENSOR-1
• C1104 FR LH SENSOR-1
• C1105 RR RH SENSOR-2
• C1106 RR LH SENSOR-2
• C1107 FR RH SENSOR-2
• C1108 FR LH SENSOR-2
• C1113 G-SENSOR
• C1115 ABS SENSOR [ABNORMAL SIGNAL]
• C1116 STOP LAMP SW
• C1120 FR LH IN ABS SOL
• C1121 FR LH OUT ABS SOL
• C1122 FR RH IN ABS SOL
• C1123 FR RH OUT ABS SOL
• C1124 RR LH IN ABS SOL
• C1125 RR LH OUT ABS SOL
• C1126 RR RH IN ABS SOL
• C1127 RR RH OUT ABS SOL
• C1143 ST ANG SEN CIRCUIT
• C1145 YAW RATE SENSOR
• C1146 SIDE G SEN CIRCUIT
• C1164  CV  1
• C1165  CV  2
• C1166  SV  1
• C1167  SV  2
• C1176 STOP LAMP SW2